The `s/z` sounds don't really pose a challenge for most people. When producing these sounds, the tip of the tongue is close to, but not touching, the *seam* between teeth and gums.
The `s/z` sounds don't really pose a challenge for most people. When producing these sounds, the tip of the tongue is close to, but not touching, the *seam* between teeth and gums.
@@ -54,4 +54,3 @@ In English, in addition to primary stress, secondary stress, and unstressed syll
Let's dig deep into the word *individual*, for example, it's pronounced as `/ˌɪndəˈvɪdʒəwəl/`. If each syllable was placed equal stress, it would sound something like /ɪn-dɪ-vɪ-dʒju-əl/... Within this pronunciation, the vowel `ɪ` in the second syllable `/dɪ/` is reduced to the schwa sound, `ə`; likewise, the vowel `ju` in the fourth syllable `/dʒju/` is also reduced to `ə`, but retains the coloration of `u`. The `l` at the end of the syllable, which originally carries a slight `ə` sound, thus becomes a very light `wᵊl`...
Let's dig deep into the word *individual*, for example, it's pronounced as `/ˌɪndəˈvɪdʒəwəl/`. If each syllable was placed equal stress, it would sound something like /ɪn-dɪ-vɪ-dʒju-əl/... Within this pronunciation, the vowel `ɪ` in the second syllable `/dɪ/` is reduced to the schwa sound, `ə`; likewise, the vowel `ju` in the fourth syllable `/dʒju/` is also reduced to `ə`, but retains the coloration of `u`. The `l` at the end of the syllable, which originally carries a slight `ə` sound, thus becomes a very light `wᵊl`...
A "consonant + consonant" combination often results in an instance where the first consonant is articulated but not voiced, creating an *invisible and inaudible stop* (3.4.1). Examples of this within words include previously mentioned *hotdog* and *network*, as well as *hard-nosed*, *partner*, and so on.
Some refer to this phenomenon as *elision*. While it's true that the sound is dropped, the action of articulation isn't skipped – in fact, it's fully completed.
When the same consonant ends one syllable and begins the next, this pair of identical consonants is known as **geminates**. In fluid, natural speech, these two consonants are vocalized only once— yet, you might sense a slight *stop* due to the presence of the previous consonant, and its completion of articulating action. Mechanically, this is similar to **elision** (3.4.3.1). This phenomenon also occurs even when two neighboring consonants are just similar, not identical.
For instance, *at that time* is not pronounced as `/ət ðæt taɪm/`, but as `/ə·ðætaɪm/`. Here, the first `t` is elided because it is followed by another consonant, so you can't hear it. However, the expected pause is still there, represented by `·`. Then, the second `t` and the third `t` form a geminate, and are vocalized only once. Similarly, *a bad day* is not pronounced as `/ə bæd deɪ/`, but as `/ə bæ deɪ/`; *with this*, is not `/wɪθ ðɪs/`,but `/wɪ·ðɪs/`.
## 3.4.3.3. 同化(assimilation)
同化(*assimilation*)主要有两种情况:
Assimilation, in English pronunciation, primarily happens in two key scenarios:
For example, in daily conversation, we often hear *Don't you?* pronounced as `/dəʊn tʃju?/`; and *Would you?* as `/wʊ dʒju?/`. The key here lies in the position of the tongue tip when pronouncing `t, d`. If placed correctly (as explained in [2.2.4](https://1000h.org/sounds-of-english/16-tdsz.html)), it naturally leads to such pronunciation when followed by `/ju/`.
Assimilation mainly happens when a word ends in `j`. Besides the explained cases where `t` and `d` are followed by `j`,
> * `s` + `j` = `ʃ`
> * `z` + `j` = `ʒ`
比如,`s+j` 可能会被读成 `ʃ`,`z+j` 可能会被读成 `ʒ`。再比如,*Miss you so much.* `/mɪ ʃu səʊ mʌʧ./`;*It was your job.* `/ɪt wɒ ʒʊr ʤɒb./`
For instance, the combination `s+j` might be pronounced as `ʃ`, and `z+j` might be pronounced as `ʒ`. Here are examples: *Miss you so much* can be pronounced as `/mɪ ʃu səʊ mʌʧ./`; *It was your job* can be pronounced as `/ɪt wɒ ʒʊr ʤɒb./`
请注意,这两组是**可能**,并非一定,并非所有英文母语使用者都如此发音。
However, it's important to note that these are possibilities, not certainties. Not all English native speakers pronounce words this way.
In a "consonant + consonant" combination, where the second is `h`, the `h` sound often gets *dropped*, simply due to its soft nature. This is because the *vocal cords* don't vibrate when pronouncing `h`, and it naturally gets overshadowed by the louder sounds before and after.
比如,*Was he hurt?* 三个单词分开读,应该是 `/wɒz hi həːt/` 在连贯的语音中,会被读成 `/wɒzi həːt/` —— 听不到 `h`,它被击穿了。
For example, take the sentence *Was he hurt?* If pronounced separately, it should be `/wɒz hi həːt/`. However, when spoken fluidly, it sounds more like `/wɒzi həːt/`; the `h` becomes unnoticeable.
Many Americans have a unique habit with the `t` sound, especially when it follows `n`. Their way of speaking often causes the `t` to disappear. For instance, when they say the word *interview*, you might hear `/ˈɪnəˌvju/`, without the `t`.
In addition, the `ð` sound can also be dropped, primarily in the common word *them*. For example, *let them*`/lɛt ðəm/` might become `/lɛt-əm/`. When the `ð` is dropped, the `t` ends up sandwiched between two vowels and turns into the voiced flap `t̬`. So, what you say or hear becomes `/lɛt̬əm/`. Therefore, in natural speech, *let him* and *let them* sound identical and only context can determine whether it's *him* or *them*.
In combinations of "vowel + vowel", an *intrusion* sound may occur.
前一个元音以 `ɪ/i/iː` 结尾,会出现加音 `j`:
When the first vowel ends in `ɪ/i/iː`, an intrusive `j` sound emerges:
> - *I am* - `/ˈaɪˈæm/` ⭢ `/ˈaɪjæm/`
> - *He is* - `/ˈhiːˈɪz/` ⭢ `/ˈhiːjɪz/`.
> - *She is* - `/ˈʃiːˈɪz/` ⭢ `/ˈʃiːjɪz/`.
> - *They are* - `/ˈðeɪˈɑːr/` ⭢ `/ˈðeɪjɑːr/`.
前一个音节以 `ʊ` 结尾,比如 `ʊ/uː/aʊ/əʊ`,会出现加音 `w`:
Similarly, when the preceding syllable ends in `ʊ`, such as `ʊ/uː/aʊ/əʊ`, an intrusive `w` sound appears:
> - *Go away* - `/ˈɡəʊ əˈweɪ/` ⭢ `/ˈɡəʊwəˈweɪ/`
> - *Do all* - `/ˈduːˈɔːl/` ⭢ `/ˈduːwɔːl/`
> - *Do it* - `/ˈduːˈɪt/` ⭢ `/ˈduːwɪt/`
> - *Throw it* - `/ˈθrəʊ ˈɪt/` ⭢ `/ˈθrəʊwɪt/`
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.