From: Digestifier To: Linux-Misc@senator-bedfellow.mit.edu Reply-To: Linux-Misc@senator-bedfellow.mit.edu Date: Sun, 2 Oct 94 16:13:12 EDT Subject: Linux-Misc Digest #866 Linux-Misc Digest #866, Volume #2 Sun, 2 Oct 94 16:13:12 EDT Contents: Re: IP Addresses For Standalone LAN (Benjamin John Walter) Re: 56.6 Kb simulated with 2 28.8Kb modems. Is it possible? (Benjamin John Walter) Re: Where do I get PPP software? (Benjamin John Walter) Is there a firewall for slackware? (The Weasel !!) Re: PROBLEM with console (Bernd Eckenfels) *** PLEASE READ THIS BEFORE POSTING *** (misc-2.07) (Ian Jackson) HELP NEEDED - Converting SCO users biz.sco.general (Shahid Ikram Butt) Re: How to pronounce Linux?? (Joseph W. DeVincentis) Linux Documentation (Franco Gerace) Re: PROBLEM with console (Carlos Dominguez) Re: How to pronounce Linux?? (jbriscoe@delphi.com) moxftp 2.2 for mosaic (Benjamin Alman) Wanted, any Linux commercial software (SET SY) Re: New User HOWTO proposal (Clifford Story) Motif (Philip Thambidurai) Intel EtherExpress ??? (CHARLES SYERS) Re: Is anyone using a TEXEL CD-ROM (SCSI) with Linux? (Mark Bolzern) Re: [Q] SW Technology (Sridhar Kodela) Re: Linux Documentation (Matt Welsh) xdm / chooser (Martin Oldfield) Re: [Q] SW Technology (Cheng-Tang Lee) Re: [ppp] One works, the other almost works. (Al Longyear) Re: Boot disk -> Root disk (Patrick J. Volkerding) TMC-850 on IRQ 11 no workee... (ecarp@netcom.com) Thanx (Eric Hausgaard) ---------------------------------------------------------------------------- From: ben@tsunami.demon.co.uk (Benjamin John Walter) Subject: Re: IP Addresses For Standalone LAN Date: Sun, 2 Oct 1994 07:06:34 +0000 : Won't work. The kernel code in most systems is smart enough to either : know 224.x.x.x is multicast or to ignore it. Apart from my Linux system, apparently ;-) peace, Ben -- __ _ / / (_)__ __ ____ __ ------------------------------ From: ben@tsunami.demon.co.uk (Benjamin John Walter) Subject: Re: 56.6 Kb simulated with 2 28.8Kb modems. Is it possible? Date: Sun, 2 Oct 1994 07:12:06 +0000 Alan Cox (iialan@iifeak.swan.ac.uk) wrote: : In article <1994Sep23.172102.5103@umr.edu> dpe@rocket.cc.umr.edu (David Edwards) writes: : >Hmmm... maybe the load balancing stuff could do this... (I have no idea : >how much of the load-balancing stuff has been implemented, or how stable : >it is...)... If you could set up routing tables at both ends for this, it : >seems like it would probibly work. (Famous last words, I know... :) ) : It's in, it should work. You'll need the ifslave program to try it out : and probably to do a bit of hackery with dip etc to set it up. Email me : if you want the bits I'd be interested in seeing them, where can I find them? peace, Ben -- __ _ / / (_)__ __ ____ __ ------------------------------ From: ben@tsunami.demon.co.uk (Benjamin John Walter) Subject: Re: Where do I get PPP software? Date: Sun, 2 Oct 1994 07:14:32 +0000 : Hello netters! I have PPP enabled in my kernel with Slackware 2.0, but I do : not know how I can go about using it? Currently, I am using slip with dip, : but I cannot find any software for dialing in with PPP. I have a dynamically : allocated IP address, and I have to dial in to get it, so I need software : that meets these needs. Much thanks in advance! Hi there! Check out the ppp-2.1.2a collection on sunsite. It contains a program, pppd, that you use to manage your PPP connections as well as a program to called 'chat' to automate your login. I think its probably lurking somewhere under /pub/Linux/system/Network/serial on sunsite.unc.edu. Peace, Ben -- __ _ / / (_)__ __ ____ __ ------------------------------ From: pescej@news.db.erau.edu (The Weasel !!) Subject: Is there a firewall for slackware? Date: 2 Oct 1994 06:22:20 GMT We are tring to setup a firewall to help protect data on our system. Is there a firewall out there for slackware? I need to install it on our gateway linux box. ------------------------------ From: ukd1@rzstud1.rz.uni-karlsruhe.de (Bernd Eckenfels) Crossposted-To: de.comp.os.linux Subject: Re: PROBLEM with console Date: 30 Sep 1994 13:37:49 GMT Joerg Schoeppe (p4001bf@sun1.lrz-muenchen.de) wrote: <...xconsole...> Der Aufruf TIOCCONS kann nur von root ausgefuehrt werden. Aus dem Grund muss man xconsole entweder SUID root machen (bin mir aber nicht sicher, ob das sicher ist), oder man laesst es vom XDM anstarten, dann laeuft es als root. xterm z.B. ist auch SUID Root, und mit xterm -C kann man sich die console anschauen! Gruss, Bernd -- (OO) -- Bernd_Eckenfels@Wittumstrasse13.76646Bruchsal.de -- ( .. ) +4972573817 ecki@lina.ka.sub.org ukd1@rz.uni-karlsruhe.de o--o *QUAK* Jetzt auch mit Plueschtier in der .Sig! (O____O) Eckes@IRC ------------------------------ From: ijackson@nyx.cs.du.edu (Ian Jackson) Subject: *** PLEASE READ THIS BEFORE POSTING *** (misc-2.07) Date: 2 Oct 1994 04:04:15 -0600 Please do not post questions to comp.os.linux.misc - read on for details of which groups you should read and post to. Please do not crosspost anything between different groups of the comp.os.linux hierarchy. See Matt Welsh's introduction to the hierarchy, posted weekly. If you have a question about Linux you should get and read the Linux Frequently Asked Questions with Answers list from sunsite.unc.edu, in /pub/Linux/docs, or from another Linux FTP site. It is also posted periodically to c.o.l.announce. In particular, read the question `You still haven't answered my question!' The FAQ will refer you to the Linux HOWTOs (more detailed descriptions of particular topics) found in the HOWTO directory in the same place. Then you should consider posting to comp.os.linux.help - not comp.os.linux.misc. Note that X Windows related questions should go to comp.windows.x.i386unix, and that non-Linux-specific Unix questions should go to comp.unix.questions. Please read the FAQs for these groups before posting - look on rtfm.mit.edu in /pub/usenet/news.answers/Intel-Unix-X-faq and .../unix-faq. Only if you have a posting that is not more appropriate for one of the other Linux groups - ie it is not a question, not about the future development of Linux, not an announcement or bug report and not about system administration - should you post to comp.os.linux.misc. Comments on this posting are welcomed - please email me ! -- Ian Jackson (urgent email: iwj10@phx.cam.ac.uk) 2 Lexington Close, Cambridge, CB4 3LS, England; phone: +44 223 64238 ------------------------------ From: sib1@Ra.MsState.Edu (Shahid Ikram Butt) Crossposted-To: comp.os.linux.admin Subject: HELP NEEDED - Converting SCO users biz.sco.general Date: 2 Oct 1994 05:37:16 -0500 Okay, Okay I should have crossposted it in the first place. I posted an article under the subject : "Does nobody here know about Linux ? " in biz.sco.general few hours ago and already have a good response. This is an honest attempt to convert SCO users to Linux. Hopefully we'll get attention of some developers and they might think about porting their popular application to Linux. If you have been enjoying Linux without paying for it then now is a good time to pay back to Linux community. Your job is to get more and more people to start using Linux instead of any other OS. The more people use Linux, more applications, faster development etc. etc. Its a good thing you see. Jump to biz.sco.general now and participate in that discussion. Shahid ______________________sib1@Ra.Msstate.Edu____________________________ Cruising Information Super Highway ------------------------------ From: devjoe@wilma.che.utexas.edu (Joseph W. DeVincentis) Subject: Re: How to pronounce Linux?? Date: 1 Oct 1994 00:22:53 GMT In article <1994Sep30.221516.23658@midway.uchicago.edu>, Richard L. Goerwitz wrote: >inge@drealm.drealm.org (Inge Cubitt) writes: [discussion of how to pronounce Linux, short I or long E first syllable?] >>What is all this long and short business? They seem to take the same length >>of time to say whether it's i as in in or i as in line. Which is which? > >It's what the old schoolteachers teach English-speaking students, and >most never stop to think whether it's true or not. I took a linguistics class once, and one of the interesting things I learned then was the answer to this question. It's long so I'll summarize. At one time far in the past the "long" and "short" vowel sounds were actually long and short versions of the same sounds. Over time, there have been many changes in the way English is pronounced, including a couple massive vowel-shifts, such that none of the vowels are pronounced today as they were originally pronounced. Other languages have undergone similar but different changes. ------------------------------ From: f_gerac@pavo.concordia.ca (Franco Gerace) Subject: Linux Documentation Date: 30 Sep 1994 20:35 -0500 I noticed that the Linux documentation (LDP) at sunsite is not ftp'able. In other words, I am not able to FTP the LDP files. Has anyone encountered the same problem? Is there any other site where one can FTP these files? --Thank You . . . ------------------------------ From: carlos@interport.net (Carlos Dominguez) Subject: Re: PROBLEM with console Date: 30 Sep 1994 10:24:41 -0400 Bernd Eckenfels (ukd1@rzstud1.rz.uni-karlsruhe.de) wrote: Gutentag! : xterm z.B. ist auch SUID Root, und mit xterm -C kann man sich die : console anschauen! I gather that it can't be done? Gruss :) -- __ __ __ | .__. __. :::: Carlos Dominguez - proprietor - sysadmin | __| | | | | |__ :::: carlos@basselope.com |__ |__| | | |__| .__| :::: Basselope *nix systems --------------------------- Internet services consulting is our forte ------------------------------ From: jbriscoe@delphi.com Subject: Re: How to pronounce Linux?? Date: Sun, 2 Oct 94 12:53:40 -0500 Will someone please drive a stake through the heart of this issue. How do you pronounce "C++" in Danish? ------------------------------ From: alman@strangiato.res.wpi.edu (Benjamin Alman) Crossposted-To: comp.os.linux.help Subject: moxftp 2.2 for mosaic Date: 2 Oct 1994 15:56:09 GMT Reply-To: alman@strangiato.Res.WPI.EDU does anyone out there have the moxftp (compiled for mosaic) binaries (and man page(s), docs, app-default-files, etc) they can .tar up and put up for ftp somewhere? I'm running linux, but I don't have the space to compile this myself... Could anyone help me out? THANKS! PLEASE reply be email if possible.. thanks! -- ______ _____ `/ \_____/ __)' From: Ben Alman [][][] [] [] [][][] [] | / Internet: alman@wpi.edu O O [] [] [] [] [] | I===::====::==============================|H=H] [] [] [] [][][] [][][] | I===::====::==============================|H=H] [] [] [] [] [] [] | o o _____ \_ Running Linux 1.1.50 O O [] [][][] [][][] [] [] \______/ \____) and XFree386-2.1.1 Why Are We Here? Because... ------------------------------ From: sys93r@ecs.soton.ac.uk (SET SY) Subject: Wanted, any Linux commercial software Date: 1 Oct 1994 13:53:25 +0100 I am interested in looking for any commercial software for Linux. Please email to me if you have any commercial software to sell. thanks in advance ------------------------------ From: Clifford Story Subject: Re: New User HOWTO proposal Date: Fri, 30 Sep 1994 14:12:40 GMT And how about this: If I'm installing Linux and I get a query, "Install blip-oxr, which combines features of blip and oxr?", it would be helpful if I knew what blip and oxr were. So a glossary would be helpful. Someone new to Linux might have UNIX admin experience, UNIX user experience, or (like me) no UNIX experience at all. The installation, I think, sorta expects the first. Of course, a Linux user will have to learn all that stuff but he's got to get installed first... Actually, this might be an argument in favor of the rookie-distribution proposal discussed in another thread. Cliff ------------------------------ From: pthambid@atl.ge.com (Philip Thambidurai) Subject: Motif Date: 30 Sep 1994 14:05:20 GMT Which vendors sell Motif for Linux? Thanks +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Philip Thambidurai Martin Marietta Laboratories TEL: 609-866-6546 Route 38, Bldg.145-2 FAX: 609-866-6397 Moorestown, NJ 08057, USA email: pthambid@atl.ge.com +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Philip Thambidurai Martin Marietta Laboratories TEL: 609-866-6546 Route 38, Bldg.145-2 FAX: 609-866-6397 Moorestown, NJ 08057, USA email: pthambid@atl.ge.com +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ------------------------------ From: charles.syers@corpsoft.com (CHARLES SYERS) Subject: Intel EtherExpress ??? Date: Wed, 28 Sep 94 11:30:00 -0600 Reply-To: charles.syers@corpsoft.com (CHARLES SYERS) as "still in the testing phase". Some potential problems are mentioned. What's the current status on this? Thanx - Chuck. --- þ OLX 2.2 þ LINUX - The choice of a GNU generation! ------------------------------ From: mark@gcs.com (Mark Bolzern) Subject: Re: Is anyone using a TEXEL CD-ROM (SCSI) with Linux? Date: Sat, 1 Oct 1994 00:36:48 GMT In article , Paul Pearson wrote: >If so, could you let me know what model and what firmware revision? I have >a DOS program that will scan the SCSI devices and tell you what the >firmware revision is if you need it. I can email it or whatever -- just let >me know. Thx. > > >--Paul Pearson > ppearson@folio.com > "Please Wait... Brain booting from floppy." Texel 3028 on Soundblaster SCSI under Linux. Also have one for my SCO BOX EPROM 3.06 on SCSI ID#5 Works fine -- Mark Bolzern : mark@gcs.com USA Tel: (303) 699-7470 Fax: (303) 699-2793 WorkGroup Solutions, Inc. The FlagShip "CA-Clipper and XBase on Unix" People FlagShip is a 4GL Database Development System & XBase Porting Tool for Unix No Runtime Fees Info at ftp.wgs.com : /pub2/wgs/Filelist OR mail: info@wgs.com ------------------------------ Crossposted-To: comp.sys.ibm.pc.hardware.systems,comp.os.linux.help From: kodela@netcom.com (Sridhar Kodela) Subject: Re: [Q] SW Technology Date: Fri, 30 Sep 1994 14:16:42 GMT Bill Broadley (broadley@turing.ucdavis.edu) wrote: : : There is a guy in this news-group who was VERY unhappy with his experences : : with this company, I believe. Look back through the posts of the last 2 : : weeks or so. [SNIP] : is widely regarded as unreliable, and shouldn't blame SWT for such : problems. I bought my system from SWT almost one year back and am pretty happy camper. I got a 486DX33 machine. SO far it never gave me trouble. Later I added another HDD, CDROM, sound card. I bought all these from SWT. Marvin came to my apartment to put it in. Later I bought a bubble jet printer and tape drive from some place else (hey they are in sale) and tried to set it up. I ran into trouble with filters and he helped me out then also eventhough i didn't buy them from him. I consider this pretty good service. This is my experience and got no association with SWT except as a happy customer. cheers have a nice weekend, sridhar kodela kodela@netcom.com : -- : Bill Broadley Broadley@math.ucdavis.edu UCD Math Sys-Admin : Linux is great. http://ucdmath.ucdavis.edu/~broadley PGP-ok ------------------------------ From: mdw@cs.cornell.edu (Matt Welsh) Subject: Re: Linux Documentation Date: Sun, 2 Oct 1994 16:44:53 GMT In article <30SEP199420355280@pavo.concordia.ca> f_gerac@pavo.concordia.ca (Franco Gerace) writes: >I noticed that the Linux documentation (LDP) at sunsite is not ftp'able. It certainly should be. Sunsite's FTP seems to be flaky over the last few days. You can get the LDP files from tsx-11.mit.edu:/pub/linux if you can't get sunsite to cooperate. If you continue to have problems please mail me a log of your FTP session. mdw ------------------------------ From: mjo@mrao.cam.ac.uk (Martin Oldfield) Subject: xdm / chooser Date: 02 Oct 1994 17:00:07 GMT Has anyone managed to successfully run xdm and the chooser under Linux ? At the moment I'm having hassles but that might just be because xdm is somewhat new and complicated. I'm running stock XFree86, as supplied with the current slackware release on 1.1.49 kernel. Thanks in advance, -- Martin Oldfield, MRAO, Cavendish Labs, CAMBRIDGE, CB3 0HE Work: 0223 337365 Fax: 0223 354599 Home: 0223 67940 Don't even remember what her lips felt like on mine. - Dylan ------------------------------ From: leecheng@samba.egr.msu.edu (Cheng-Tang Lee) Crossposted-To: comp.sys.ibm.pc.hardware.systems,comp.os.linux.help Subject: Re: [Q] SW Technology Date: 01 Oct 1994 01:33:25 GMT In article <10426@eagle.ukc.ac.uk>, A.R.R.Torres wrote: > >I am about to order a system from SW Technology. >I am planning to run dos/windows and Linux. >Does anyone have any experience dealing with >them? >-- or would anyone recomend another dealer with >a similar price? >They are offering a P90 (intel plato), 8MB, 540 M Quantum HD, NCR SCSI, >2x CD-Rom for $2499. > > I've bought several machines for my school and my friends. We're very happy with SWT. However, I kept seeing people warning others not to order from SWT because they saw a long article complaining about SWT. Well, I saw it, too. The only thing impressed me is its length. And my only comment is that I wish that guy knows a bit about linux, or even Unix. I'm only a new user in Linux. I also happen to experience same problems like the person did. Most of the problems can be remedied in minutes, even seconds. I don't know if one should yell out for them. My only real problem is that SWT forgot to send me DOS drivers for the parts because I run Linux only on my machine. One phone call to Marvin solved this. I got everything I need in one week. I'm not affiliated with SWT, just a happy user. James ------------------------------ From: longyear@netcom.com (Al Longyear) Subject: Re: [ppp] One works, the other almost works. Date: Sun, 2 Oct 1994 16:38:34 GMT pp000547@interramp.com writes: > Made some progress, but not there yet. > Let me try to isolate the difference. > 1. Here is where snarf.com craps out: >----------------------------------------------------------- > [...] >Oct 1 21:15:30 bedlam pppd[74]: ipcp: received COMPRESSTYPE >Oct 1 21:15:30 bedlam pppd[74]: (45) >Oct 1 21:15:34 bedlam Oct 1 2 >Oct 1 21:15:30 bedlam pppd[74]: ipcp: received ADDR >Oct 1 21:15:30 bedlam pppd[74]: (0.0.0.0) >Oct 1 21:15:30 bedlam pppd[74]: (ACK) >Oct 1 21:15:30 bedlam pppd[74]: ipcp: returning Configure-ACK >Oct 1 21:15:30 bedlam pppd[74]: sent [IPCP ConfAck id=0x2 ] > ^^^^^^^^^^^^^^^^^^^^^^^^^ >Oct 1 21:15:30 bedlam pppd[74]: fsm_sdata(IPCP): Sent code 2, id 2. >Oct 1 21:15:30 bedlam pppd[74]: Untimeout 2194:114e0. >Oct 1 21:15:30 bedlam pppd[74]: Setting itimer for 0 seconds in untimeout. >Oct 1 21:15:30 bedlam pppd[74]: ipcp: up >Oct 1 21:15:30 bedlam pppd[74]: Could not determine remote IP address > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > [...] >Oct 1 21:17:08 bedlam pppd[74]: fsm_rtermack(LCP). >Oct 1 21:17:08 bedlam pppd[74]: Connection terminated. >Oct 1 21:17:08 bedlam pppd[74]: set kernel debugging level to 2 >Oct 1 21:17:08 bedlam pppd[74]: Exit. > 2. Here is what interramp.com does: >------------------------------------------------------------ > [...] >Oct 1 21:19:04 bedlam pppd[116]: ipcp: received COMPRESSTYPE >Oct 1 21:19:04 bedlam pppd[116]: (45) >Oct 1 21:19:04 bedlam pppd[116]: (ACK) >Oct 1 21:19:04 bedlam pppd[116]: ipcp: received ADDR >Oct 1 21:19:04 bedlam pppd[116]: (38.145.180.110) >Oct 1 21:19:04 bedlam pppd[116]: (ACK) >Oct 1 21:19:04 bedlam pppd[116]: ipcp: returning Configure-ACK >Oct 1 21:19:04 bedlam pppd[116]: sent [IPCP ConfAck id=0x4a ] > ^^^^^^^^^^^^^^^^^^ >Oct 1 21:19:04 bedlam pppd[116]: fsm_sdata(IPCP): Sent code 2, id 74. >Oct 1 21:19:04 bedlam pppd[116]: IO signal received >Oct 1 21:19:04 bedlam pppd[116]: IO signal received >Oct 1 21:19:04 bedlam pppd[116]: rcvd [IPCP ConfNak id=0x1 ] e0 f7 > ~~~~~~~~~~~~~~~~~~ >Oct 1 21:19:04 bedlam pppd[116]: fsm_rconfnakrej(IPCP): Rcvd id 1. > [...] >Oct 1 21:19:05 bedlam pppd[116]: local IP address 38.10.180.76 >Oct 1 21:19:05 bedlam pppd[116]: remote IP address 38.145.180.110 >Oct 1 21:19:05 bedlam pppd[116]: Script /etc/ppp/ip-up started; pid = 121 >Oct 1 21:19:07 bedlam pppd[116]: Alarm >------------------------------------------- and done! > > How come interramp.com gives me its IP address but snarf.com won't? It is because they don't have one. Let me see if I can explain further. The RFC 1332 (and others) defines the IPCP configure request frame to send the various options to be used in the IP protocol exchange. One such option is the IP address. The purpose for telling your remote the IP address is so that it knows the value when it configures its local routing. The point-to-point links such as PPP, SLIP, and PLIP, do not use their own local IP address. There are no routes to that address. All routes are to the peer's IP address. (This is one of the reasons why you can not ping your own IP address.) Each side has the option of sending or not sending their IP address. It is not a MUST field. (For a definition of the RFC term MUST, see most any of the RFC documents.) If you do not know your IP address, you are to send an invalid IP address to the remote. The invalid address is 0.0.0.0. The remote is to recognize that this is an invalid address and send a NAK frame for this field and supply the proper IP address to be used. The problem is that the RFC does not say what to do if the remote doesn't know the IP address either. It can't send a NAK and supply the address of 0.0.0.0 since the protocol requires that the remote then take this value and send it again on a new configure request frame. It can't send a IPCP reject frame. This means that it does not wish to do IP protocol. The only other option is to send an ACK for the frame. So, when the IPCP protocol is completed, the software looks for the remote IP address. This is 0.0.0.0. Well, this will not work. So, the system immediately takes down the IP layer. Since you don't want to exchange any other protocol but IP at this time, the LCP layer goes down and the connection is terminated. There are three solutions to the problem: 1. You may refuse to negotiate the IP addresses. To do this, include the option "-ip". This will ignore the IP addresses given by the remote and not give your IP address to the remote in your configure request frame. You must then include both local and remote IP addresses on the pppd execution line. 2. You may give the remote your IP address and refuse to accept theirs. This is done with the option "ipcp-accept-local". (What this option means is that while you give your address, you are willing to accept the remote saying "no, I want you to use address x.x.x.x".) 3. You may specify the remote address and not your own. This will request that you get an IP address for your local access from the remote system and have an address for the remote to use. If I was in your situation, I would do option #3. So, I recommend that you add the following option to the pppd process execution: :10.10.10.10 This will simply give the remote a phoney IP address so that when it sends you the invalid IP address, you will have something to give it in response. You don't have to worry about the address 10.10.10.10 going on the internet. Only your local IP address and the final destination IP address will be used in the frames. It would be difficult for them to not have a valid IP address for you. > Is snarf.com maybe saying "I'll tell you my IP address if you tell >me your IP address"? No. It means that they don't know their IP address. This is not a problem. Just tell them one. :) -- Al Longyear longyear@netcom.com ------------------------------ From: gonzo@magnet.mednet.net (Patrick J. Volkerding) Subject: Re: Boot disk -> Root disk Date: 2 Oct 1994 17:21:57 GMT In article <36k9lv$beu@mailer.fsu.edu>, Pramod Koshy wrote: >The problem I am having is that the boot disk makes a Ram disk and then >boots the system from RAM. Then it tells me to load the root disk which also >works fine. After this when I try to run the fdisk , it says "out of memory" >.Having only 4 MB of RAM , i need the command that disables the ram disk and > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ >loads the boot, root from the floppy. The information accompanying the >distribution I have does not give me any information on how to do it. Can >somebody please help me. Slackware 2.0.1 has a file, LOWMEM.TXT, which describes a couple simple workarounds to this problem. You can get the file from most Slackware mirror sites, including ftp.cdrom.com:/pub/linux/slackware/LOWMEM.TXT. Hope it helps - Pat ------------------------------ From: ecarp@netcom.com Subject: TMC-850 on IRQ 11 no workee... Reply-To: ecarp@netcom.com Date: Wed, 28 Sep 1994 13:46:21 GMT I have this really flaky Adaptec 1542B, so I decided to dust off a TMC-850 compatible card and use it. Since I have a four-port comm card, I decided to switch the TMC-850 over to IRQ 11. I changed the IRQ #define in seagate.c to 11, rebuilt the kernel, and rebooted. (1.1.51). The kernel booted, recognized the card as an ST-0X, but recognized my Maxtor as not only LUN 0, but also LUN4 and 7! Then it proceeded to delete some entries (bogus, but it didn't say which ones it was deleting), and go on. The kernel read the partition table OK, but right after it did, it gave me the message "SCSI error ... id 4 lun 0 rc=27010000", then "I/O error 0810 sector 0, unable to read partition table of dev 0810". Then the kernel panicked: "kernel panic: no device passed to allocate_device()". The root device is /dev/sda3 (0803). I have six partitions on this SCSI drive. The drive itself is a Maxtor 1.2GB HD. This same card worked on a pre-1.0 kernel, and it works with the Summer 1994 Yggdrasil kernel. The machine is basically down for the moment, since the Adaptec card is pretty flaky, and I don't have the spare cash to replace it. Help?? -- Ed Carp, N7EKG Ed.Carp@linux.org, ecarp@netcom.com Finger ecarp@netcom.com for PGP 2.5 public key an88744@anon.penet.fi ** PGP encrypted email preferred! ** "What's the use of distant travel if only to discover - you're homeless in your heart." --Basia, "Yearning" ------------------------------ From: ueh@pool.info.sunyit.edu (Eric Hausgaard) Subject: Thanx Date: Wed, 28 Sep 1994 15:29:38 GMT First, I would like to say Thanx to everyone who E-Mailed me with their suggestions with my SMC Ultra Problem. I came in one day and it started working beautifully. I have not had any problems since! Next, could you tell me how I can get the passwd program to use the /etc/shadow file. in Slackware 2.0 (? the latest from ftp.cdrom.com) I need this so I can be compatable with BSDI which the REST of the school is using. Also, whoever put together the Slackware Distributions, there is a bug in the Ytalk implementation. It kicks out an error but keeps working after. Lastly, I KNOW this is the wrong place to post this, but with CNEWS, How the *&#$@&^* do I allow other machines to use my site's net-news (as well as myself) Thanx again Eric -- ============================================================================ My Opinions Change Every Half Hour |Eric Hausgaard: EX-VP Comp Sci Club Flames/E-mail to ueh@sunyit.edu | SUNY Institute of Treknology -- ------------------------------ ** FOR YOUR REFERENCE ** The service address, to which questions about the list itself and requests to be added to or deleted from it should be directed, is: Internet: Linux-Misc-Request@NEWS-DIGESTS.MIT.EDU You can send mail to the entire list (and comp.os.linux.misc) via: Internet: Linux-Misc@NEWS-DIGESTS.MIT.EDU Linux may be obtained via one of these FTP sites: nic.funet.fi pub/OS/Linux tsx-11.mit.edu pub/linux sunsite.unc.edu pub/Linux End of Linux-Misc Digest ******************************