From: Digestifier To: Linux-Misc@senator-bedfellow.mit.edu Reply-To: Linux-Misc@senator-bedfellow.mit.edu Date: Wed, 5 Oct 94 10:13:20 EDT Subject: Linux-Misc Digest #881 Linux-Misc Digest #881, Volume #2 Wed, 5 Oct 94 10:13:20 EDT Contents: Re: which is better: Mitsumi or Panasonic CDROM? (Mark A. Davis) Re: Word (Text) processors for Linux? (Michael_Nelson) Linux and Houdini-Macs (Damir Smitlener) Help w/SB16 SCSI2 & linux (Donald R Lloyd) Re: X News-reader for LinuX (Hans de Graaff) Re: kermit on Linux CD - violates copyrights (Adam J. Richter) Problem with static route table (Hien Pham) Re: Cirrus Logic 5428 ! (Rudie Vantoever) Re: Bash Arrays[?] (Kevin K. Lewis) Re: PLS recommend a G++ debugger ( with or without X ) (Matt Weber) Re: Word (Text) processors for Linux? (Piet Ruyssinck) final test (News) final test (news@sparc.eunet.si) Re: How to let normal users run SVGALIB programs (SOLN) (Mr D R Barlow) Re: Slackware Pro v2.0 old? (zachary brown) Wanted: True color pix-viewer (Arjan van Oeveren) Re: Word (Text) processors for Linux? (J.J. Paijmans) Re: How to pronounce Linux?? (Nisse Husberg) SB_PRO does not sound like 4W/channel.. Re: Hmmm (Geert Uytterhoeven) ---------------------------------------------------------------------------- From: mark@taylor.infi.net (Mark A. Davis) Subject: Re: which is better: Mitsumi or Panasonic CDROM? Date: Mon, 03 Oct 1994 14:02:09 GMT quinlan@freya.yggdrasil.com (Daniel Quinlan) writes: >>>> The specs are lying. The Panasonic is faster than the Mitsumi. >>> What evidence do you have for that ? >Teemu Kilpivuori writes: >> Yeah,what. As I understand, Panasonic doesn't use IRQ nor DMA, only >> software polling, which makes it slower,and it causes more CPU-load >> than Mitsumi with IRQ and DMA enabled. I have tested both drives, >> and seen that myself, which is why I bought a Mitsumi. >Unless I am mistaken, that isn't the case. >Under Linux, Mitsumi drives don't require an IRQ although they will >use one and don't use DMA even if the drive does support it. >Did you test it under Linux or another operating system? And to think.... SCSI is made soooooo obsolete by these proprietary CD-ROM interfaces........ ;) -- /--------------------------------------------------------------------------\ | Mark A. Davis | Lake Taylor Hospital | Norfolk,VA (804)-461-5001x431 | | Director/SysAdmin | Information Systems | mark@taylor.infi.net | \--------------------------------------------------------------------------/ ------------------------------ From: nelson@seahunt.imat.com (Michael_Nelson) Subject: Re: Word (Text) processors for Linux? Date: 4 Oct 1994 13:10:26 GMT Reply-To: nelson@seahunt.imat.com Spencer PriceNash (spencer@montego.umcc.umich.edu) wrote: -> In the case of becoming very clever, you could use TeX, but I don't -> think you wanna hear that. Well, there _is_ an intermediate step: LaTeX. It seems to me to be fairly easy to use, compared to TeX. - Michael - -- Michael Nelson nelson@seahunt.imat.com San Francisco, CA FAX: 1-415-621-2608 ------------------------------ From: damir@is.net (Damir Smitlener) Subject: Linux and Houdini-Macs Date: Mon, 03 Oct 1994 18:01:42 -0500 Anyone tried to install Linux on a Mac with a Houdini (486) board? If this is possible, all my troubles would be over. -- damir smitlener gt7092d@prism.gatech.edu damir@is.net ------------------------------ From: don@chopin.udel.edu (Donald R Lloyd) Crossposted-To: comp.os.linux.help Subject: Help w/SB16 SCSI2 & linux Date: 3 Oct 1994 10:35:48 -0400 I've got a 330 meg SCSI drive and an NEC SCSI CD-ROM connected to an SB16 SCSI2 (at least until there's a Linux driver for the AHA2940 that's currently sitting on my shelf waiting to become useful). I'm booting DOS from a 730 meg WD IDE drive on a PCI enhanced IDE controller, and want to dedicate the SCSI drive to Linux. I'm trying to install Linux from the Slackware Linux Toolkit (August) CD-Rom. I boot the install disks using the SCSI kernel and can get the system set up & installed if I enter RAMDISK aha152x=0x140,12,7,1 at the boot: prompt. Everything runs smoothly; install goes fine, boot disk created, LILO installed with the above aha152x line as an append; but I can't boot the system except from the install disks. When I boot LILO (either from HD or floppy), I get LI01010101... on into infinity. (Err.. it might be 101010, not 010101... it's whichever doesn't mean it's a CRC error). When I try to boot from the boot disk I created, my drives can't be found and I never even get to a prompt. -- Don Lloyd don@chopin.udel.edu "Mmmmmm.... floor pie." Stuck using a PC, but still an Amiga guy at heart... ------------------------------ From: graaff@dutiws.twi.tudelft.nl (Hans de Graaff) Subject: Re: X News-reader for LinuX Date: Wed, 5 Oct 1994 07:30:44 GMT In article <36sjdj$7cm@sun.cais.com>, Don Rubin wrote: >I use XRn and it leaves alot to be desired. Has anyone built >xvNews for Linux? I would be interested in hearing about any >other X newsreaders too. xvnews 2.2.1 compiles on Linux without problems (in fact, xvnews is currently being developed on Linux). Hans -- Hans de Graaff J.J.deGraaff@TWI.TUDelft.NL Delft University of Technology Department of Information Systems ======================================================================= click me ------------------------------ From: adam@adam (Adam J. Richter) Subject: Re: kermit on Linux CD - violates copyrights Date: 4 Oct 1994 16:56:39 GMT In article <36otjk$584@canopus.cc.umanitoba.ca>, Budi Rahardjo wrote: >To CD-ROM vendors, ftp maintainers, etc., there is a "discussion" in >comp.protocols.kermit.misc that if you provide kermit on your CD >or ftp-site, you have to contact Columbia University to get a >permission to distribute it. >Otherwise, you are violating their policy. Yggdrasil long ago removed kermit from Plug-and-Play Linux for this reason. I believe that the other Linux CD makers have done the same with their CD's. -- Adam J. Richter Yggdrasil Computing, Incorporated (408) 261-6630 "Free Software For The Rest of Us." ------------------------------ From: hienpham@csulb.edu (Hien Pham) Crossposted-To: comp.os.linux.admin,comp.os.linux.help Subject: Problem with static route table Date: 4 Oct 1994 18:06:08 GMT Hi everyone, I have a problem with networking my Linux box. I have Yddrasil Summer 94 Linux 1.1.0 #84 with NET-2 running. I have set up my static route table with local ip address of 128.178.10.1 and 128.178.10.2 for my Linux boxes with netmask 255.255.255.0 and broadcast addr 128.178.10.255. The system is on the same datalink. My local network is 128.178.10.0. My first problem is "arp -a" returns nothing and when I execute "netstat -rn" I got the error "route: unsupported address family 2560 !". Any ideas ? My ifconfig shows that my NIC card is running with arp up as configured. Moreover, my xserver can't seem to run remote x-clients. I keep getting the message "can connect to calvin:0.0". Thanks in advance for any advice. -- % Henry Pham %%% Jet Propulsion Laboratory % % Senior Software%%% 4800 Oak Grove Drive % % Engineer %%% Pasadena, CA 91109 % % %%% E-Mail: hienpham@beach.csulb.edu % ------------------------------ From: Rudie.Vantoever@prgbbs.idn.nl (Rudie Vantoever) Date: 04 Oct 94 22:06:01 Subject: Re: Cirrus Logic 5428 ! Looks there are many problems with Cirrus 5428 cards ru> From: rutger@arrakis.kub.nl () ru> Date: 3 Oct 1994 18:23:21 GMT ru> Organization: Tilburg University, The Netherlands Rutger ( rutger@arrakis.kub.nl ) wrote: ru> Richard Stone (rstone@infi.net) wrote: ru> : Liu Chen (lchen@prang.ee.nus.sg) wrote: : : -> My computer is using Cirrus Logic 5428 Display Card! : : -> Anyone out there knows how to set the "Xconfig" file in Linux in order ru> to execute Xwindows successfully? : : Me too! ru> : I've seen enough requests for this that I'll post my (working) ru> Xconfig file : for the CLGD-5428 to anonymous ftp on my home system in ru> /pub/linux. ru> Here's my Xconfig file: I've got the CLGD-5426 card. The Xconfig file ru> is working although I don't get a completely stable screen... I use 'Xconfig' as shown below. I use a HK brewed VGA card with a 5428 and a NEC Mulitisync II monitor. Screen is stable, vertical timing from monitor is not 100 %. You can use 'clgd5426' also. ========================== cut ======================================== RGBPath "/usr/X386/lib/X11/rgb" FontPath "/usr/lib/X11/fonts/75dpi/,/usr/lib/X11/fonts/Speedo/, /usr/lib/X11/fonts/misc/" Keyboard AutoRepeat 500 5 ServerNumLock LeftAlt Meta RightAlt Compose ScrollLock ModeLock Microsoft "/dev/mouse" BaudRate 1200 vga256 Virtual 800 600 ViewPort 0 0 Modes "800x600" "640x480" Chipset "clgd5428" Displaysize 800 600 # Clocks 25.23 28.32 41.16 36.08 31.50 39.19 45.08 49.87 64.98 72.16 75 80.01 vga2 Virtual 800 600 ViewPort 0 0 Modes "800x600" "640x480" ModeDB # name clock horizontal timing vertical timing flags "640x480" 28 640 676 776 812 480 480 485 505 "752x564" 36 752 788 916 952 564 564 569 594 "800x600" 40 800 864 1000 1056 600 600 605 631 ============================= cut ======================================== Rudie van 't Oever -- | Internet: Rudie.Vantoever@prgbbs.idn.nl | | Standard disclaimer: The views of this user are strictly his own. ------------------------------ From: lewikk@grasshopper.aud.alcatel.com (Kevin K. Lewis) Subject: Re: Bash Arrays[?] Date: 04 Oct 1994 17:54:07 GMT In article <36n9f1$n5o@apakabar.cc.columbia.edu> djt1@aloha.cc.columbia.edu (David J Topper) writes: Greetings from the exasperation society, I'm wondering about the compatibility of BASH with the KORN SHELL. In particular, I'm trying to access individual components in an array. [...] won't work either. Does BASH use some other method? Is that method portable to sh, csh, and/or ksh? Bash does not have arrays. I've heard rumors of Bash supporting arrays in the future, though. Thanks, -- Kevin K. Lewis | My opinions may be unreasonable lewikk@aud.alcatel.com | but such is the voice of inspiration ------------------------------ From: mattw@meaddata.com (Matt Weber) Subject: Re: PLS recommend a G++ debugger ( with or without X ) Date: 4 Oct 1994 17:15:43 GMT gdb and try it within emacs. You don't need X for emacs and it will show your code in another section of the screen. The only thing I miss at home that I have at home that I have at work is purify (memory bounds checker). Even that can be simulated with some of the development malloc's floating around. Right now I'm trying to get debug_malloc to work. This is at oak.oakland.edu but I forget the directory. It's something like pub/unix/c/devel/debug-malloc.tar.Z -- ######################################################################### Matt Weber CSC Consulting Ph: (513) 768-4440, FAX: (513) 768-4446 255 East Fifth St. 27th Floor Cincinnati, Ohio 45202 ------------------------------ From: pruyss@nessy.rug.ac.be (Piet Ruyssinck) Crossposted-To: comp.unix.questions Subject: Re: Word (Text) processors for Linux? Date: 5 Oct 1994 10:08:07 GMT Nick Kralevich (nickkral@po.EECS.Berkeley.EDU) wrote: : Greetings. : I'm attempting to find a word processor for Linux. stop attempting, install TeX/LaTeX : One that will allow me to create reports LaTeX does that : and type up documents. LaTeX does that : So far I've been using Jove That's an editor... : which is useful as a text editor, but not as a word processor. ... as you've discovered. : I'm looking for somthing that will allow : for different fonts, along with text formatting. Then you need LaTeX : I don't think emacs is what I'm looking for. That's also an editor. : I've heard of TeX, but I'm not really sure what it is, and I'm : hesitating to install the 14 disks it takes for the binary : distribution. Stop hesitating. : So, what is a good word processor for Linux or Unix in general? LaTeX : Preferably somthing that is freeware or shareware. LaTeX is freeware : What do you use? LaTeX Hope this helps, -- | Piet RUYSSINCK Piet.Ruyssinck@rug.ac.be | | Department of Data Analysis +32 9 264 4733 | | University of Ghent (RUG) | | Krijgslaan 281, building S9 (ARC), B-9000 Ghent, Belgium | ------------------------------ From: news@rsc3.hermes.si (News) Subject: final test Date: 05 Oct 1994 11:53:07 GMT If this works, I'll stop, ok? Bozzo ------------------------------ From: news@sparc.eunet.si Subject: final test Date: 5 Oct 1994 12:55:44 +0100 test ------------------------------ From: xuuah@csv.warwick.ac.uk (Mr D R Barlow) Subject: Re: How to let normal users run SVGALIB programs (SOLN) Date: 5 Oct 1994 13:06:26 +0100 In article <1994Oct3.182132.645@flapjack.ieunet.ie>, nick@flapjack.ieunet.ie (Nick Hilliard) writes: >Andrew Berkley (ajb@wonder.resnet.cornell.edu) wrote: >: (try running sasteroids from a telnet :). But, since SVGALIB needs access >: to /dev/console (new versions) which is a link to a tty0-6, you need >: someway of letting it access them. One solution is to make tty? world >: readable/writeable/etc, but that's just wrong... The real solution, which >: most SVGALIB install programs do (witness zgv) is to install the program >: with owner _root_, and set the 'Run this program as owner' bit on the >: program. >: chmod a+s FileName > >This is *NOT* a solution. This is *DANGEROUS* and *STUPID*. Arguably. It is however the only way to run svgalib programs as non-root. The problem isn't the tty permission, it's the fact that svgalib does direct port access. It does however provide a call (vga_init()?) which sets everything up and resets the uids, which is supposed to be the first line of any svgalib program. You can also tighten it up a bit -- one suggestion is to make all svgalib programs group 'console' and group executable (-rwsr-x--- 1 root console), then add only the users you 'kind of' trust to the console group. It's still not exactly an ideal solution, but the alternatives seem to be to put it in the kernel (bloat...) or to make a kind of client/server thing with one setuid process and normal user processes communicating with it. This has however already been done, it's called X :-) Does anyone have any better ideas. Daniel ------------------------------ From: zbrown@lynx.dac.neu.edu (zachary brown) Subject: Re: Slackware Pro v2.0 old? Date: 5 Oct 1994 08:18:31 -0400 In article <36t629$rka@pcnet1.pcnet.com>, Wayne Adams wrote: > I just received my cd-rom version of Slackware's Pro v2.0 and see >that it is using the Linux kernel 1.1.18 but now I see the kernel is all the >way up to 1.1.50 (anything newer?). Being a newbie to Linux, should I be >concerned with this, or get used to using Linux before recompiling the >kernel? It also came with Xfree 2.1.1 and 3.0 and I now see 3.1 is avail. >Again, do the upgrade? > I understand that things change quickly, but still wondering. (G) > TIA, > Wayne > In terms of the kernel, I'd say don't bother keeping up unless you're into developing it with the other generous people who do. The kernel you received was chosen for stability after it had been around awhile. The more up to date a kernel is, the less certain you can be that it is stable. But sometimes you'll want to take that risk if a newer version supports some hardware that wasn't supported before, or if some software requires it. As for the new Xfree 3.1, it is apparently a major enhancement over the previous version, and because of the way it's developed (as opposed to the linux method), new releases of Xfree are much more likely to be stable and safe, so I'd say, get it. -ZB- ------------------------------ From: arjano@htsa.hva.nl (Arjan van Oeveren) Subject: Wanted: True color pix-viewer Date: Wed, 5 Oct 1994 09:40:00 GMT Hello, Since I've gotten a new video-card with a 24-bit DAC, I'd like to know if there is any software to utilize it, that DAC I mean, with. I am searching for picture viewers and animation viewers. The more formats they support the better, but in any case JPG for the picture viewer and MPEG and/or AVI for the animation viewer. Since X doesn't allow for more than 256 colors, yet, the programs should be able to run in textmode with help of svgalib or something. I'm forced to use the rather excellent DOS viewers have in the mean time. ( Display and DVPEG, aren't they portable ? ) In case someone is interested, here's my configuration: - i486SX-25 with 8 meg ram, no cache :( , isa bus - Topcolor VGA card with: CL-GD5426 chipset 1 meg ram - WDC2170 harddrive, nice drive but -slow- due to my @&^#$&$^ I/O-card ! - Linux 1.0.9, Slackware release 1.2 ( If I remeber correctly ) - XFree86 2.0 - SVGAlib which came with above mentioned Slacware release, I don't know the version This may sound like a not-so-state-of-the-art software configuration, but I'm rather new to Linux and it's said to be stable. Besides, I don't have a tape streamer or CD-ROM drive and I'm not plannig to install 50 floppy's or so every few weeks. -Any- help or pointers will be appreciated greatly. Arjan -- ================================================================================ "I am saddened to see our world criple, Arjan van Oeveren, Netherlands at such a young age...." -anonymous- arjano@htsa.hva.nl ================================================================================ ------------------------------ From: paai@kub.nl (J.J. Paijmans) Crossposted-To: comp.unix.questions Subject: Re: Word (Text) processors for Linux? Date: 5 Oct 1994 12:06:01 GMT In article <36ttu7$dqq@infoserv.rug.ac.be> pruyss@nessy.rug.ac.be (Piet Ruyssinck) writes: >Nick Kralevich (nickkral@po.EECS.Berkeley.EDU) wrote: >: Greetings. > >: I'm attempting to find a word processor for Linux. >stop attempting, install TeX/LaTeX [some valid remarks on LaTex and the use of- erased] > >: I don't think emacs is what I'm looking for. >That's also an editor. Mind that emacs IS the other thing you are looking for. The combination of LaTeX and emacs can't be beaten. Paai. ------------------------------ From: nhu@dione.hut.fi (Nisse Husberg) Subject: Re: How to pronounce Linux?? Date: 5 Oct 1994 09:38:15 GMT stryder@access.digex.net (Stryder) writes: >rpark@uunet.uu.net (Richard Park) writes: >>In article <36c3pv$41e@panix3.panix.com>, >>S. Joel Katz wrote: >>>>Is there a correct pronunciation? >>> There is a correct pronunciation and an incorrect pronunciation. >>>The 'I' is short. Linux almost rhymes with 'shucks'. Or, if you prefer >>>'Lih-nuhks'. >>This is the topic of a religious war. If you look at older versions of the >>FAQ, it says the correct pronunciation is the one specified above. But in >>more recent versions, it seems to have changed so that the "i" is a long vowel. >>I pronounce it the second way, but I don't think I would hate you if you >>pronounced it the first way. 8~) >It SHOULD be pronounced "linooks". You know. Unix backwards. Nope. The "i" is long and it should be pronounced "leenooks" (I hope -:). Anyway the "u" should be pronounced like in "you". Nisse ------------------------------ Crossposted-To: comp.sys.ibm.pc.soundcard.tech,comp.sys.ibm.pc.soundcard From: et@madmax.aa.nps.navy.mil () Subject: SB_PRO does not sound like 4W/channel.. Date: Tue, 4 Oct 1994 17:34:23 GMT I have just installed SB_PRO + MITSUMi_double-speed CRrom drive + 8_ohm unamplified SONIC speakers on my Linux box. I hooked up the CD sound to Sb_Pro after switching the pins. It works, but it did not live up to my expectations. It does not sound like 4W per channel to me. The manual says that when hooked up to at 8ohm speakers, the power drops to 2W/channel. First, I could not make much sense out of this. It should be just the opposite! Second, even then it does not sound like 2W's either. I have not adjusted anything with the software, since the software I use -cdplayer- is a simple command line tool. I turn up the volume at the back of the card to maximum though. Any insight is appreciated. ismail ------------------------------ From: geert@cs.kuleuven.ac.be (Geert Uytterhoeven) Crossposted-To: alt.fan.linus-torvalds Subject: Re: Hmmm Date: 4 Oct 1994 08:56:47 GMT In article <36p88t$24b@classic.iinet.com.au>, cam@iinet.com.au (Cameron Newham) writes: |> PS: biggest regret in life so far: having not met Linus in person |> because out of all of the weeks this year I had to be sick the week |> he came here. :( Just fly to the Linux meeting in Belgium on October the 15th :-) Greetings, Geert +--------------------------------------------------------------------+ | Geert Uytterhoeven -->> Wavelets, Amiga, MultiUser, Linux-m68k,... | | Geert.Uytterhoeven@CS.kuleuven.ac.be | | Department of Computer Science, K.U.Leuven, Belgium | +--------------------------------------------------------------------+ Click! ------------------------------ ** FOR YOUR REFERENCE ** The service address, to which questions about the list itself and requests to be added to or deleted from it should be directed, is: Internet: Linux-Misc-Request@NEWS-DIGESTS.MIT.EDU You can send mail to the entire list (and comp.os.linux.misc) via: Internet: Linux-Misc@NEWS-DIGESTS.MIT.EDU Linux may be obtained via one of these FTP sites: nic.funet.fi pub/OS/Linux tsx-11.mit.edu pub/linux sunsite.unc.edu pub/Linux End of Linux-Misc Digest ******************************