Subject: Linux-Activists Digest #204 From: Digestifier To: Linux-Activists@senator-bedfellow.MIT.EDU Reply-To: Linux-Activists@senator-bedfellow.MIT.EDU Date: Mon, 6 Sep 93 02:13:07 EDT Linux-Activists Digest #204, Volume #6 Mon, 6 Sep 93 02:13:07 EDT Contents: Linux & Andrew (Michael Zuelsdorff) where is 'spell' ? (Nicolas Tripon) Re: linux and dos partition (s345002@emu.insted.unimelb.edu.au) Re: QIC-36 supported? (Remco Treffkorn) Re: A Word Processor for Linux (Remco Treffkorn) Re: NeXTStep & Linux (Rich Mulvey) SLS 1.03, IN-2000, and no disks (Eric_Scott_Williams@cup.portal.com) Re:help on tex (Holger Wiese) Re: CL5426 graphics board? (Robert W. Brewer) SCSI, kernel lockups, pl12/pl11, gcc 2.4.5/2.3.1 (Bill Mitchell) Re: Linux 'port to 16-bit machines?? (John Henders) Re: Linux 'port to 16-bit machines?? (David Fox) Slackware - where to buy it? (Chuck Wegrzyn) help me! (Sherry Stafford) help me ! (Sherry Stafford) Re: A Word Processor for Linux (Piercarlo Antonio Grandi) Re: NeXTStep & Linux (Brandon S. Allbery) NI5210 driver ("d woodman") Linux for the Atari (ooh!-) Line? (Jason Uberig) [Q] video modes on virtual consoles (Stefan Joachim) ---------------------------------------------------------------------------- From: micha@veeble.han.de (Michael Zuelsdorff) Subject: Linux & Andrew Date: Fri, 3 Sep 93 22:31:41 GMT Hi, netters some time ago I got a Yggdrasil Linux (I think it was pl6 or 7). I would like to contact the guy, who worked on the Andrew port. Meanwhile, I investigated some work on it and about 75% of atk part runs quite stable (ez, chart, zip and friends) But there are still some bombing programs like prewiew and others... Debugging Andrew isn't that easy, so maybe someone has got it done already and can give me some hints. Another thing: Who can help me with some details about the SCSI audio commands of Sony CDU 8002 drive ? The drive works fine on iso 9660 cds, but no chance with the common linux driver (541) and audio cds. Thanks in advance. michael ------------------------------ From: nt@gndx2502.grenoble.hp.com (Nicolas Tripon) Date: Fri, 3 Sep 1993 15:08:54 GMT Subject: where is 'spell' ? Whence could I ftp 'spell' ? Thank you. ------------------------------ Subject: Re: linux and dos partition From: s345002@emu.insted.unimelb.edu.au Date: 5 Sep 93 22:05:29 EST In article , inu574f@aurora.cc.monash.edu.au (Mark Cosham) writes: > msmith@volta.elee.calpoly.edu (Mark Smith) writes: > >>In article john@valeron.NoSubdomain.NoDomain (Chi-Hwa Marcos) writes: >>>If I partition a portion of my dos drive for linux and later decide to remove the >>>partition, would I be able to access the deleted partion in dos? Another words, >>>can I access the entire drive without having to reformat the drive? Any help is >>>appreciated. > >> Yes, you can, but you'll have to set up a DOS extended partition, thus >>creating a D: (or what ever the letter is after your last current DOS drive.) >>Example: If you currently had only a C:, you would have to make the second >>partition D:.. There's no way to link two partitions together under dos.. > > Try looking up the DOS command append (I think - it could be join), but > it definitly can be done. It's the JOIN command actually, but it's a messy way of doing it. Basically, you'd have your original DOS C drive partition - then you create a directory on it, say, "TEST" and use: JOIN D: C:\TEST then when you move into the TEST directory, you are actually on drive D: ... and as an extra bonus, if you are running DOS 6 ... ... Microsoft didn't ship SUBST and/or JOIN !! it's a messy solution .. forget it and just have a second drive. I have 5 partitions on my machine (I run OS/2 and DOS under BOOT MANAGER) regards, David ------------------------------ From: root@hip-hop.suvl.ca.us (Remco Treffkorn) Subject: Re: QIC-36 supported? Date: Sun, 5 Sep 1993 01:20:22 GMT pcg@decb.aber.ac.uk (Piercarlo Antonio Grandi) writes: : Various people write: : : : >: I have my eye on a tape drive (Wangtek 5150EN, I think) which has a lotsa good stuff deleted! : I think I never heard of a board that enables a QIC-36 tape drive to hang Actuall I have one right here, made by Wangtek! I will let you have it for $160, half of the original price. Interested ?-) : off a QIC-02 bus, or viceversa; there are at least two that allow a QIC-02 : or QIC-36 tape drive to hang off a SCSI bus, but they are rather ancient. : : To end: the names of some Everex/Archive host controllers that have (nearly) : the same programmatic interface: 811/831, 409/499. : I knew, someone would fill in the blanks and put the icing on the cake :-) Well folks, now you have the definitive word on the subject, thread closed. Thanks, Remco remco@hip-hop.suvl.ca.us <<-- USE IT ! Sometime soon I have to figure out how to do this AUTOMATICALLY !! ------------------------------ From: root@hip-hop.suvl.ca.us (Remco Treffkorn) Subject: Re: A Word Processor for Linux Date: Sun, 5 Sep 1993 01:26:06 GMT bsa@kf8nh.wariat.org (Brandon S. Allbery) writes: : In article <26aues$i9v@news.bu.edu> heiser@bumetb.bu.edu (Bill Heiser) writes: : >Things like WORDPERFECT are available for UNIX, but not as far as I know : >for LINUX. And I'd be surprised if it *ever* is. It is hard to get : : I wouldn't. Especially with iBCS-2 support under development. : : >you saw something equivalent to "QUICKEN", or "XTALK/WIN" for any : >Unix platform? : : I'm working on a replacement for Quicken. Slowly... : : ++Brandon : -- : Brandon S. Allbery kf8nh@kf8nh.ampr.org bsa@kf8nh.wariat.org : "MSDOS didn't get as bad as it is overnight -- it took over ten years : of careful development." ---dmeggins@aix1.uottawa.ca This sounds gooood! I just don't like the slowly bit ;-) Need a hand? I am willing to help and have some time available. Anybody else? Remco remco@hip-hop.suvl.ca.us << use this for replies! I mean it !!!!!!!!!!! ------------------------------ From: rich@mulvey.com (Rich Mulvey) Subject: Re: NeXTStep & Linux Date: Sat, 4 Sep 1993 22:41:03 EDT rlion@access.digex.net (crazy lion) writes: > martini@tournesol.hep.physik.uni-muenchen.de (Ullrich Martini) writes: > >>hi, > >>we here a lot about running ms-windows apps on linux boxes, but there are >>much better user interfaces than windows, for example NeXT Step. this is >>why i am wondering if there are any activities to build a next-linux >>interface like wabi. >>maybe it would be sufficient to have a source-code compatibility. is it true > >>that the objective-c compiler used by next is available and ported to linux? >>(heard something like that) > >>bye, ullrich > > nextssetp is, in my opinion the best OS there is. but it's hardware > requirements are just too great for intel. you'd have to have a fully > loaded comupter to even get one program running. so i doubt that anyoe > would spend all the time it owuld take to write it when few could benefit.. > "Too great for Intel?" Ummmm... you may be interested in knowing that it has been available on Intel processors for several months now... and in fact, since Next is no longer producing hardware, the average person is likely to see it *only* on Intel machines... :-) - Rich -- Rich Mulvey Amateur Radio: N2VDS 787 Elmwood Terrace rich@mulvey.com Rochester, NY 14620 ------------------------------ From: Eric_Scott_Williams@cup.portal.com Subject: SLS 1.03, IN-2000, and no disks Date: Sun, 5 Sep 93 08:48:01 PDT I now have the enhancement kit (I suspect the real important part of it was the 8-pin DIP marked 2.7). Just replacing the PROM with 1.0356 (their latest firmware rev downloaded from the bulletin board) didn't work. I now have loaded SLS 1.01 onto my SCSI hard drive. However, I also have SLS 1.03 on an IDE hard drive, which has several problems. The IN2000 portion of the kernel now does in2000_queue_command timeout! in2000_queue_command timeout! in2000_queue_command timeout! ... upon startup, and no drives are found. (This after several trivial fixes to the IN2000 source code and the usual fixes to makefiles and host.c.) Any ideas? Also, why doesn't SLS 1.01 allow swapspace on my SCSI drive? I put a 20 MEG partition of swap space and, when I try to use it, I get the message in2000_abort I would like to have more swapspace when running X. Thanks in advance. ------------------------------ From: cindy@tron.gun.de (Holger Wiese) Subject: Re:help on tex Date: Sun, 5 Sep 1993 13:44:00 +0200 Am 03.09.93 um 08:52 schrieb PTROUTON%BFSEC.BT.CO.UK@USENET.ZER unter dem Betreff help on tex: > From: ptrouton@bfsec.bt.co.uk (Paul Trouton) > Subject: help on tex > Keywords: tex & div > Message-ID: > Organization: BT > > SOme of the doc files I have are in the *.tex format. I used latex to produce a > dvi file ...... so now what do I do to this !!! I would like ps output. Try dvips which converts dvi-files to PostScript. Works fine for me. Bye, Holger ... WindowError:00B Inadequate disk space. Need 50 meg minimum. -- THE ANSWER V2.03 ------------------------------ From: rwb114@cac.psu.edu (Robert W. Brewer) Subject: Re: CL5426 graphics board? Date: 5 Sep 1993 17:46:07 GMT Reply-To: rwb114@cac.psu.edu Steven M. Palm (smp@solaria.mil.wi.us) wrote in : >I just got a CL5426 graphics card. I believe the chipset is a Cyrix >chipset. Does anyone know if this is supported in Linux for X? Yes. It is supported by XFree86 1.3. I'm using one right now. It's made by Cirrus Logic. -Rob -- Robert W. Brewer Linux and XFree86: Two great tastes... ------------------------------ Crossposted-To: comp.os.linux.help From: mitchell@mdd.comm.mot.com (Bill Mitchell) Subject: SCSI, kernel lockups, pl12/pl11, gcc 2.4.5/2.3.1 Reply-To: mitchell@mdd.comm.mot.com (Bill Mitchell) Date: Sun, 5 Sep 1993 17:19:22 GMT A few days ago I posted a bug report to c.o.l.development re SCSI woes and kernel lockups with SLS 1.03. From email responses I've gotten, I understand that I need to: 1. upgrade my kernel from pl11 to pl12 2. compile the pl12 kermel with gcc 2.3.1 instead of 2.4.5 I've got the pl12 kernel sources, but don't know where to find a gcc 2.3.1 distribution set up for linux installation. I did find gcc 2.3.1 sources and tried to build it. I had some problems there but eventually did get it built - only to then realize that I'd probably misconfigured it before the build, and don't know how to configure/install it properly for linux. Can anyone point me towards a gcc 2.3.1 distribution of binaries and support files set up for linux installation? I think I may have a set of SLS 1.02 disks which haven't been reused yet - - Might that include gcc 2.3.1? If so, and it it's less than obvious where it's buried, can someone give me some pointers on locating it and installing it on my SLS 1.03 system? Am I having fun yet? :) -- mitchell@mdd.comm.mot.com (Bill Mitchell) ------------------------------ From: jhenders@jonh.wimsey.bc.ca (John Henders) Subject: Re: Linux 'port to 16-bit machines?? Date: Sun, 5 Sep 1993 12:12:27 GMT ph9991_hall@rivers.acc.uwrf.edu writes: >I have two 16-bit machines I use as footstools and doorprops in my computer >room, and I was wondering if I will ever be able to do anything more >constructive with them. Would it be possible to 'port the Linux OS over to >the lower PC's such as 8088's and '286's? I know that a GOOD multitasking OS >requires a '386 or better, but could a NON-multitasking Linux be made >available? As has been mentioned several times, your best bet is minix for the 8088 or xenix for the 286. The chances of anyyone porting linux to either of these processors is minimal. xenix and minix are available used for less than the cost of the SLS release on disk. -- John Henders GO/MU/E d* -p+ c+++ l++ t- m--- s/++ g+ w+++ -x+ ------------------------------ From: dfox@hip-hop.suvl.ca.us (David Fox) Subject: Re: Linux 'port to 16-bit machines?? Date: Sun, 5 Sep 1993 16:46:51 GMT ph9991_hall@rivers.acc.uwrf.edu wrote: : Reply-to: James.F.Hall@uwrf.edu : Please don't flame... This ISN'T the irritating question answered again and : again for newbies... : If this topic has already been discussed, my kill filter must have skipped : over it. Sorry if so... : -- : I have two 16-bit machines I use as footstools and doorprops in my computer : room, and I was wondering if I will ever be able to do anything more : constructive with them. Would it be possible to 'port the Linux OS over to : the lower PC's such as 8088's and '286's? I know that a GOOD multitasking OS : requires a '386 or better, but could a NON-multitasking Linux be made : available? You sure can run linux on them. Hook them up as terminals using null modem cables hooked up to a linux box. : Sure, that would also imply supporting the 360k drives, and assume no graphics : (which automatically takes out a lot of periphery software, btw, so smaller : hard drives will still be ok). I think there would be some support for a : project like this if it could run reREASONABLY ell on a 10MHz box with, say, : 2Mb memory. Seriously speaking, even on a 286 I would not want to run Unix, because the architecture of the chip is too crippled to support it. Even though there are versions of Unix (Coherent, for one) there are limits such as processes cannot be bigger than 64K, and other restrictions which you don't have if running on a 386. But, they make good terminals though. :) : Maybe it's possible to replace the 'tasking with 'swapping: putting one job to : "sleep" (ala Mac Multifinder) while you go to another. 'Swapping is used on : Dos 5.0's DosShell. Well, then it wouldn't really be Unix, I don't think. It also wouldn't run as well. It certainly wouldn't be something I would want to run. : -- : Internet: James.F.Hall@uwrf.edu -- David E. Fox email: hip-hop!dfox@amdahl.com 5479 Castle Manor Drive San Jose, CA 95129 Thanks for letting me change the magnetic 408/ 253-7992 images on your hard drive. ------------------------------ From: wegrzyn@nic.cerf.net (Chuck Wegrzyn) Subject: Slackware - where to buy it? Date: 5 Sep 1993 20:48:22 GMT Hello. I am trying to find a place that sells the Slackware version on CDROMs. Does any one know a place? Many thanks, Chuck Wegrzyn. ------------------------------ From: stafford@mailer.cc.fsu.edu (Sherry Stafford) Subject: help me! Date: Sun, 5 Sep 1993 20:51:03 GMT Help me ! I have a Ultrastor 34f SCSI-II controller and Linux does not awknowledge it or the drives. can you help me in what I need to do to be able to use Linux. ThanX ------------------------------ From: stafford@mailer.cc.fsu.edu (Sherry Stafford) Subject: help me ! Date: 5 Sep 93 20:43:24 GMT Help Me! I have a SCSI - Ultrastor 34f controller and Linux does not awknowledge the SCSI adapter or drives. Can you help with what I need to do. ThanX ------------------------------ From: pcg@decb.aber.ac.uk (Piercarlo Antonio Grandi) Subject: Re: A Word Processor for Linux Reply-To: pcg@aber.ac.uk (Piercarlo Grandi) Date: Sun, 5 Sep 1993 23:16:57 GMT On 4 Sep 1993 20:39:56 GMT, Bill Heiser (heiser@bumetb.bu.edu) wrote: In article falk@unixg.ubc.ca (David Falk) writes: >Yet,I have found that the only thing that keeps me tied to the DOS >world is the lack of a good word processor in the UNIX World. Things like WORDPERFECT are available for UNIX, but not as far as I know for LINUX. And I'd be surprised if it *ever* is. Well, let me repeat my plug for 'doc', the WSYWYG editor/wordpro/DTP thingie in the standard Interviews distrib. It may not have every bell&whistle, but its OO organization makes it very impressive and flexibe (yes, tables, pictures, multiple columns, whatever). You can find ready-compiled interviews 3.1 binaries on most Linux FTP sites; the name of the files begins with iv3.1 and they are in the X11 subtree. ------------------------------ From: bsa@kf8nh.wariat.org (Brandon S. Allbery) Subject: Re: NeXTStep & Linux Date: Sun, 5 Sep 1993 22:59:16 GMT In article <930904.224103.9T2.rusnews.w165w@mulvey.com> rich@mulvey.com (Rich Mulvey) writes: >rlion@access.digex.net (crazy lion) writes: >> nextssetp is, in my opinion the best OS there is. but it's hardware >> requirements are just too great for intel. you'd have to have a fully >> loaded comupter to even get one program running. so i doubt that anyoe >> would spend all the time it owuld take to write it when few could benefit.. >> > "Too great for Intel?" Ummmm... you may be interested in knowing that >it has been available on Intel processors for several months now... and >in fact, since Next is no longer producing hardware, the average person >is likely to see it *only* on Intel machines... :-) Which doesn't change the fact that it rivals NT for hardware requirements to run it.... ++Brandon -- Brandon S. Allbery kf8nh@kf8nh.ampr.org bsa@kf8nh.wariat.org "MSDOS didn't get as bad as it is overnight -- it took over ten years of careful development." ---dmeggins@aix1.uottawa.ca ------------------------------ From: "d woodman" Subject: NI5210 driver Date: 5 Sep 1993 23:45:16 -0400 Reply-To: d_woodman@bsmail.bs.ac.cowan.edu.au Does anyone know of the existance of a driver for the Racal Interlan NI5210 ethernet card for Linux? Thanks David Woodman School of Business, Edith Cowan University, Western Australia AARNet: d.woodman@cowan.edu.au TEL: +61 9 383 8041 FAX: +61 9 383 8754 ------------------------------ From: uberig@gfx.engga.uwo.ca (Jason Uberig) Subject: Linux for the Atari (ooh!-) Line? Date: Mon, 6 Sep 1993 05:15:55 GMT Hello All! I browsed the group and didn't see any Atari related stuff. It sure would be nice to see a port of Linux for the Atari ST/Falcon/etc. Is/has anyone done this yet? I've heard a few rumors, but nothing substantial yet. Please respond by e-mail if possible - thanks. Thanks, Jason. -- +---------------+------------------------------------------------------+ | Jason Uberig | E-mail: uberig@gfx.engga.uwo.ca | | "Nothing is impossible, just some things are more improbable." | +----------------------------------------------------------------------+ ------------------------------ From: stefan@donald.ruhr.de (Stefan Joachim) Subject: [Q] video modes on virtual consoles Date: Sun, 5 Sep 1993 22:55:13 GMT Hi Linux Users ! Is it possible that virtual consoles may have different vidoe modes ? For example: = 80x25 chars and = 100x40 chars ?? Many thanx in advance , Stefan -- stefan@donald.ruhr.de ------------------------------ ** FOR YOUR REFERENCE ** The service address, to which questions about the list itself and requests to be added to or deleted from it should be directed, is: Internet: Linux-Activists-Request@NEWS-DIGESTS.MIT.EDU You can send mail to the entire list (and comp.os.linux) via: Internet: Linux-Activists@NEWS-DIGESTS.MIT.EDU Linux may be obtained via one of these FTP sites: nic.funet.fi pub/OS/Linux tsx-11.mit.edu pub/linux tupac-amaru.informatik.rwth-aachen.de pub/msdos/replace The current version of Linux is 0.99pl9 released on April 23, 1993 End of Linux-Activists Digest ******************************