From: Digestifier To: Linux-Admin@senator-bedfellow.mit.edu Reply-To: Linux-Admin@senator-bedfellow.mit.edu Date: Sat, 1 Oct 94 16:14:20 EDT Subject: Linux-Admin Digest #130 Linux-Admin Digest #130, Volume #2 Sat, 1 Oct 94 16:14:20 EDT Contents: Assuring that a PPP link stays up... (David Simmons) Re: modules - HELP! (Bjorn Ekwall) Re: c++ problem with Slackware 2.0 distribution (Steve Whorwood) LINUX mouse problem (Ruz) Xconfig needed for Trident TVGA 9000B (Thomas Rose) corba for linux (Laurent Chavey) [Q]: Linux on HP PC? (Jozsef Kadlecsik) dump & restore for ext2 ? (olav woelfelschneider) Re: Has anyone gotten ftape to work? (Dennis Flaherty) Linux Terminal Server from floppy? (Bart Kindt) "failed" message during startup (Tony Richardson) Matrox MGA (Klaus Landwehr) Re: Replacing finger information (Bill Zettler) XON or CTS probs? (John Dee) Re: Deskjets and Ghostscript? (Eugene Austin III Gibbs) printcap for HP Deskjet and HP LJ ? (foerstk@vax.sbu.ac.uk) Re: Request info on LINUX books and magazines (Phil Hughes) Re: Has anyone gotten ftape to work? (Timothy Murphy) Re: ftp freeze problems (john taylor) Re: X-windows (Stephen Louis Ulmer) Re: Matrox MGA (Stephen Louis Ulmer) Information when TELNET (Jimmy M. Ferng) ---------------------------------------------------------------------------- From: simmons@EE.MsState.Edu (David Simmons) Crossposted-To: comp.protocols.ppp Subject: Assuring that a PPP link stays up... Date: 30 Sep 1994 19:32:30 GMT Reply-To: simmons@EE.MsState.Edu Does anybody have a good, well thought-out system of assuring that a PPP link between two UNIX boxes stays up, through the use of crontab entries? Presently, I have two linux boxes at each end sitting on their respective networks, and hooked up to the phone lines via 28.8kbps modems. The machine on the campus-side is running a getty on the line, and the remote machine calls in to it. (Under ideal curcumstances, it would just have to call in once, and the link would stay up perpetually, but alas, we do not live in an ideal world.) Presently, I have a crontab entry on the campus machine which is invoked every {14,29,44,59} minutes past the hour. It checks to see if the link is up by pinging the remote machine a few times, and grepping for a positive responce. (Regretably, this is the BSD-style ping, not the Sun-style ping that will report an "alive" or "no answer".) If the remote machine does not pong the pings, the ppp process is killed off so that the getty can be run and accept calls from the remote machine trying to re-establish the link. There is also a crontab entry at {1,16,31,46} that makes sure arp tables entries and routing tables are set up correctly, but that is immaterial. The remote machine tries to ping the campus machine every {0,15,30,45} minutes past the hour and if dead, runs the char script that logs in to the remote computer and re-establish the link. (hopefully exactly one minute after the campus machine realized something was up and killed off the useless ppp so the getty could answer the call...) This mechinism seems somewhat kludgy, and I was wondering if anybody has implemented any better way. (And yes, the PPP link does die every now and then due to natural causes, requiring a mechinism.) Thanks for any ideas. David -- David Simmons, System Administrator simmons@ee.msstate.edu Mississippi State University Electrical and Computer Engineering Visit my home page! http://www.ee.msstate.edu/~simmons ------------------------------ From: bj0rn@blox.se (Bjorn Ekwall) Subject: Re: modules - HELP! Date: 1 Oct 94 11:42:27 GMT Frank M. Haynes (frank@vatmom.COM) wrote: > In <54626@mindlink.bc.ca> Robert_Broughton@mindlink.bc.ca (Robert Broughton) writes: > >I'm using v1.1.43 of the kernel, and have compiled a version of modules > >dated June 26. When I do "insmod drv_hello.o", I get messages that say that > >_printk, _register_chrdev, and _unregister_chrdev are undefined. (When I do > >"insmod ftape.o", I get lots more undefines.) What's the problem? > >-- > >*-*-*-*-*-*-*-*-*-*-* > Got exactly the same problem. Am using 1.1.45 as obtained from Sunsite. > Am using insmod with date of June 27, 1994 as shown in insmod.1. > Is there a later modules? Please POST the reply. This is almost certainly due to using gcc 2.4.5. Both the kernel _and_ insmod have to be compiled with gcc 2.5.8 Sorry, but that's the way it is... Bjorn Ekwall == bj0rn@blox.se ------------------------------ From: Steve@vertex.demon.co.uk (Steve Whorwood) Subject: Re: c++ problem with Slackware 2.0 distribution Reply-To: Steve@vertex.demon.co.uk Date: Tue, 27 Sep 1994 04:06:55 +0000 In article <363nk5$2oa@rugch4.chem.rug.nl> tieleman@chem.rug.nl "Peter Tieleman" writes: > I am trying to compile c++ programs, but they seem unable to find or > use the c include files like and . For C everything works > fine. > Did I miss some setup things? Or what am I doing wrong? I do have the c++ > libraries and include files installed ... > > An example of what happens: > #include > #include > > main(){ > float x; > x = cos(3.14); > printf("Hallo"); > } > > > gcc -o test test.cc > /tmp/cca041071.o: Undefined symbol _cos referenced from text segment Try this: gcc test.cc -o test -lm You're not linking in the maths library. The -lm cures that. You shouldn't have been able to compile the above as c or c++ without it. I'd also be careful of calling your executable test. I've got Slackware 2 installed and, if you do a man 1 test, you'll find the manpage for Gnu test. On my system, that lives in /usr/bin, which was before my home directory in my path. Oh, cos returns a double as well. :-) -- Steve Whorwood :Resurgam E-Mail Steve@vertex.demon.co.uk ------------------------------ From: crusanow@slate.mines.colorado.edu (Ruz) Subject: LINUX mouse problem Date: Tue, 27 Sep 1994 04:05:43 GMT Howdy, I am setting up a Linux network for a system administration class and have run into a problem. The mouse gives me an error saying device or resource busy!!!! This means I cannot run X and finish the system. Any ideas? Ruz was here... (crusanow@mines.colrado.edu) ------------------------------ From: tom@vulcan.owl.de (Thomas Rose) Subject: Xconfig needed for Trident TVGA 9000B Date: Wed, 28 Sep 1994 16:19:17 GMT Hi ! We need a Xconfig-File for a Trident TVGA9000 B chip on an NONAME VGA Card. 512 KB Video RAM Noname 14" max. 800x600 Thanks for Helping Tom -- ===== Thomas Rose Jakbo-Kneip-Strasse 92 40595 Duesseldorf Germany Telefon: +49 5251 370231 | +49 211 707484 E-Mail : tom@vulcan.owl.de ------------------------------ From: chavey@stimpy.eecis.udel.edu (Laurent Chavey) Subject: corba for linux Date: 1 Oct 1994 16:21:59 GMT Is there any ongoing project trying to use the corba specs to write a distributed object server,client for linux. If so, can someone finger me to it. Thank you. ------------------------------ From: kadlec@blackhole.kfki.hu (Jozsef Kadlecsik) Subject: [Q]: Linux on HP PC? Date: 30 Sep 1994 11:03:34 GMT Hi, My old no-name 386 PC will finally be sorted out and there is a possibility that I will get a HP PC. Linux runs on this old machine like a champ :-). I stick to Linux. Will it run on a HP PC?? Together with X??? Has anybody ever tried to install Linux on a HP PC? Thanks any hint or advice, Jozsef Kadlecsik -- **************************************************************************** Address: P.O.B 49 Budapest 1525 Hungary Hungarian Academy of Sciences Phone : +36 (1) 169 9499 Central Research Institute for Physics Fax : +36 (1) 169 6567 E-mail : kadlec@sunserv.kfki.hu kadlec@blackhole.kfki.hu **************************************************************************** ------------------------------ From: wosch@rbg.informatik.th-darmstadt.de (olav woelfelschneider) Subject: dump & restore for ext2 ? Date: 1 Oct 1994 14:58:57 GMT Hi there, I am searching for a version of dump&restore for the ext2 filesystem, if someone can point me to this, I would be very happy! Thank you very much, Olav -- /======================================+======================================\ | Olav "Mac" Woelfelschneider | I refuse to grow up, | | wosch@rbg.informatik.th-darmstadt.de | I don't want to lose my humor... | \======================================+======================================/ ------------------------------ Crossposted-To: utah.linux From: dennisf@denix.elk.miles.com (Dennis Flaherty) Subject: Re: Has anyone gotten ftape to work? Date: Fri, 30 Sep 1994 05:01:33 GMT In article <1994Sep27.212144.2361@excaliber.uucp>, Joel M. Hoffman wrote: > [who wrote what deleted] > >>Yes, FTAPE works, when it is configured and installed correctly. > > > >This is definitely NOT true, in my experience. > >Most if not all earlier versions of ftape did not work, > >however you configured them. > > > >To get ftape to work, you must upgrade to Linux 1.1.50. > >You must then get the latest version of ftape, ftape-1.13b, > > Hmm. I'm about to purchase a tape drive for use w/ Linux. But I'm > running version 1.0.9 (and I'm very happy with it). Can someone > confirm that ftape works with 1.0.9 or thereabouts? > > Thanks. It worked for me back then; just *don't* apply the ftape-irq-dma.patch. It's for the new kernels. If you buy a Conner C250MQ, apply the ftape-conner.patch if you use Conner's DOS/Windows software to format your tapes. -- Dennis Flaherty dennisf@denix.elk.miles.com Oatmeal Stout: It's the Right Thing to Drink! ------------------------------ Crossposted-To: comp.os.linux.help From: bart@dunedin.es.co.nz (Bart Kindt) Subject: Linux Terminal Server from floppy? Date: Sat, 1 Oct 1994 03:35:11 GMT Hi all, I have to make a terminal server, containing a 16 port serial board, mostly for SLIP dial-in work. At the moment I have 4 modems installed in our Linux Server itself, but I want to move all modems to a sepparate machine, which will be connected to our Ethernet backbone. I would like to 'run' this terminal server from a floppy disk, while all disk-io should come from the main server. How do I do this? Also, which 16 port board, compatible with Linux, should I buy, and where can I get it? Here in New Zealand I cannot get the BOCA board. Anybody has an address where I can order one? Any help and hints are very much appreciated! Bart. ==================================================================================== Bart Kindt (ZL4FOX) System Operator, Efficient Software NZ LTD, Dunedin, New Zealand ==================================================================================== ------------------------------ Crossposted-To: comp.os.linux.help From: tony@guts.biomed.uakron.edu (Tony Richardson) Subject: "failed" message during startup Date: Sat, 1 Oct 1994 11:03:18 +0000 I get the following message while booting my Linux machine: Calibrating delay loop.. ok - 16.61 BogoMips failed BusLogic SCSI: Inquiry Bytes: 41 41 33 33 Configuring BusLogic EISA/VESA HA at port 0x330, IRQ 11, ID 7 BusLogic SCSI: interrupt received, but no mail scsi0 : BusLogic Does anyone know what the "failed" in the second line means? I assume it has something to do with my Buslogic EISA SCSI controller, but I'm not sure what. I'm running Version 1.1.18 of the kernel. I don't think the message was present in older versions. Thanks for any help, Tony Richardson tony@guts.biomed.uakron.edu ------------------------------ Date: Thu, 29 Sep 1994 06:04:03 +0100 From: Klaus_Landwehr@mailserve.fido.de (Klaus Landwehr) Subject: Matrox MGA Hallo All, I'am looking for a XConfig-File to get the Matrox Ultima work. Who can help me ? Bye Klaus (242:1000/550.4) ========================================================================== (29 Sep 94, 06:04) ------------------------------ From: wrz@bzettler.dnai.com (Bill Zettler) Subject: Re: Replacing finger information Date: 27 Sep 1994 21:02:51 GMT In article <36907f$qit@Tut.MsState.Edu>, cheema@earth.sparco.com (Mubashir Cheema) writes: |> |> Due to security reasons we have disabled the finger from outside |> of our machine. Now if someone tries to finger they get the |> message " connection refused ", which some people find annoying. |> |> [Condensed: how do I replace the finger daemon?] (1) Create the file /home/cheema/work/nofinger.c : main() { printf ("get that finger outa my face!\n"); } (you may wish to replace that message with something more apropos) (2) compile with : cc -o nofinger nofinger.c (3) now replace the "finger" line in /etc/inetd.conf to read : finger stream tcp nowait root /home/cheema/work/nofinger nofinger (4) find the process ID of inetd (29 on my machine, of course it depends on your startup sequence) with ps aux, kill -HUP it to make inetd re-read its configuration files. Killing it outright and restarting will doubtless work too, but may mess something else up. (5) now "finger" your machine (using full netpath of course, i.e., finger @sparco.com to see your message. Obviously move the files around to taste. NOW, the nasty bit - the usual way to "secure" a local net is to firewall it via the gateway, that is, you have a bridge machine which filters out what gets to you. It does bring piece of mind to the suits, who don't know their computers from their fax machines, and who certainly wouldn't like just *anyone* from messing with the system parameters. For example, my nofinger program *could* be written to have a hidden back door. And people who are afraid of the finger program are generally pretty tense. If you're firewalled, this won't work because the daemon will never be woken up, because the datagram will never get there. Maybe you know all this. If so, sorry for prattling on. Good Luck. ================= Bill Zettler bzettler@dnai.com ------------------------------ From: jd@ohbabe.stat.com (John Dee) Subject: XON or CTS probs? Date: Thu, 29 Sep 1994 08:56:46 GMT [ Article crossposted from comp.os.linux.help ] [ Author was John Dee (jd@ohbabe.stat.com) ] [ Posted on Thu, 29 Sep 1994 08:37:12 GMT ] [ Article crossposted from comp.os.linux.help ] [ Author was John Dee (jd@ohbabe.stat.com) ] [ Posted on Sun, 25 Sep 1994 12:05:41 GMT ] For some reason I seem to be having trouble receiving data with my modem under slackware 1.1.45. It seems to send data at a normal rate (1600+cps) but when receiving, it pauses and the transfer rate is horrible. I have CRTSCTS set in the getty defaults file. Should I be using setserial or stty in another fashion? ------------------------------ From: austing@tamsun.tamu.edu (Eugene Austin III Gibbs) Crossposted-To: comp.os.linux.help Subject: Re: Deskjets and Ghostscript? Date: 1 Oct 1994 10:41:33 -0500 While we're on this subject, has anyone out there gotten gs to work with a DeskJet 1200C?? I've tried three different versions, currently 3.01, and all of them give me output that is basically several pages of random chars and form feeds. I'm currently using the cdj550 driver as well as tried the cdjmono driver and they all give the same output. If you could, please also reply in e-mail. Thanks, Austin Gibbs austing@tamu.edu ------------------------------ From: foerstk@vax.sbu.ac.uk Subject: printcap for HP Deskjet and HP LJ ? Date: 30 Sep 94 10:18:29 GMT Hi fiolks, In mz distribution, there was no /etc/printcap. Does anybody have the settings for HP-Deskjet Plus with automatic postscript detection. I need settings for a HP LH III as well. Is where a site, where you can get printcap entries for all printers with postscript detection ? bye Klaus ------------------------------ Crossposted-To: comp.os.linux.help,comp.os.linux.misc From: fyl@eskimo.com (Phil Hughes) Subject: Re: Request info on LINUX books and magazines Date: Thu, 29 Sep 1994 16:09:36 GMT Luis Miguel Silveira (lms@rle-vlsi.mit.edu) wrote: : I am looking for good reference books and/or magazines that include : descriptions or articles about Linux. Are there any available? If a : CD-ROM with the software comes with the book/magazine that would be a : *big* plus. There is, of course Linux Journal (blurb below). As for books there is Thomas Uhl's book that has a couple of titles (and is in German and English), Matt Welsh's _Linux Installation and Getting Started_, Olaf Kirch's _Linux Network Administrator's Guide_ and, all the How-Tos. SSC has published both Matt Welsh's and Olaf Kirch's books in perfect-bound versions ($12.95 and $18.95 respectively. Send e-mail to sales@ssc.com, call 206-527-3385 or fax 206-527-2806 to request a complete SSC catalog. The info below is on Linux Journal. +--------------+ P.O. Box 85867 * Seattle, WA * 98145-1867 * USA | Linux | (206)524-8338 * fax: (206)526-0803 * linux@fylz.com | Journal | Subscriptions: (206) 527-3385 FAX: (206) 527-2806 +--------------+ LINUX JOURNAL FAQ 6/23/94 This FAQ contains information about Linux Journal, the magazine covering the Linux Community. Topics covered are: o general/history o content o subscriptions o writing for LJ o advertising in LJ o Linux-related product releases o consultants directory o distributors/retailers o misc o if all else fails ... General/History We see our mission as serving the Linux community while working to promote the use of Linux. Although most of our initial sub- scribers have come from the Internet we expect half of our future readers will find LJ as their initial source of information on Linux. This means that LJ can provide a way for people to find hardware, software and help in getting themselves going. We see this as a benefit to the Linux newsgroups by reducing "newbie" questions as well to our advertisers by providing them with a new way to reach potential new users. The idea for producing Linux Journal arose in early 1993. In late February, 1994 we mailed our first issue. The magazine received a very positive response - both on the Internet and elsewhere. Is- sue #4, the August issue, will be released in mid-July. SSC, publisher of Unix and C pocket references for over ten years, is now the publisher, with Phil Hughes having the overall responsibility for the complete publication. Phil's 11 years in publishing and 15 years of experience with Unix will be applied to ensure the quality of the publication as well as its promo- tion. Michael K. Johnson is now the editor. He founded the original "man project", which was the forerunner of the current "Linux Documentation Project", and maintains a few Linux packages, as well as the "Linux Kernel Hackers' Guide". Content Each issue of Linux Journal offers articles that appeal to new- comers as well as serious technical articles for long-time Unix users. Although LJ is Linux-specific, many of the articles are of interest to Unix users and other users of freely redistributable software. Regular columns include: o Interviews with prominent Linux personalities o Linux Programming Tips by Michael Johnson o What's GNU? by Arnold Robbins o Cooking with Linux by Matt Welsh o The Debian Distribution by Ian Murdock o New Products o Letters to the Editor o Book and Product Reviews o Linux Counter o Linux Consultant's Directory Features that have appeared in Linux Journal include: o Tips for Optimizing Memory Usage by Jeff Tranter o Sendmail+IDA by Vince Skahan o World Wide Web by Bernie Thompson o Comparison of Linux, Windows NT and OS/2 by Bernie Thompson o Onyx: a copylefted 4GL by Michael Kraehe o Icmake: a new make tool by Frank Brokken and Karel Kubat o Linux and Hams: what hams involved in Linux have to say o Hints & Tips for Optimizing Linux Disk Usage by Jeff Tranter o Linux Systems Administration by Mark Komarinski o Linux Journal Survey Results o Linux Around the World o The Linux File System Standard by Daniel Quinlan o Linux Distributions o Wine Status Advertisers include: o Algorithms Corporation o Amtec Engineering, Inc. o Basmark o Fintronic o FYL o InfoMagic o Prime Time Freeware o PromoX Systems o Sequoia International, Inc. o Signum Support o Springer-Verlag o SSC o Trans-Ameritech o Usenix o Unix Expo o Windsor Technologies o Yggdrasil Subscriptions Subscriptions are available internationally through SSC directly. They are also available in specific regions through our interna- tional distributors. Magazines are mailed internationally through a "surface air lift" service which delivers the magazines quickly to the countries of destination where local mail will be handled by surface delivery. Subscription rates are as follows: $19/year U.S., $24/year Canada, $29/year Foreign $34/2 years U.S., $44/2 years Canada, $49/2 years Foreign Back issues are available for $4 ($6 airmail) while supplies last. Linux Journal, P.O. Box 85867, Seattle, WA 98145-1867 FAX: +1 206 527-2806, Phone: +1 206 527-3385 E-mail: subs@ssc.com At this address we can accept payment by checks in U.S. funds drawn on a U.S. bank or a foreign bank in their native currency, American Express, Visa and MasterCard. Since the internet is not a secure network, you may not wish to send credit card numbers via email. Subscriptions start with the next issue of Linux Journal. Back issues, if still available, are $4 each or $6 each for air mail delivery. Writing for Linux Journal Articles in Linux Journal cover the range from "how do I get started" to kernel hacking. We intend to try to strike a balance so the magazine will be accessible to the newcomer and yet con- tinue to contain useful information to long-term Linux users. Also, in order to legitimize Linux to many business unix users, we need to offer articles on commercial uses for Linux. They can be in the form of documenting a place/job where Linux is being used commercially, a technical article on the development of a commercial application, or a review of a commercial product. If you are considering writing for LJ or have a lead to a commer- cial use, contact our editor, Michael Johnson. He can be reached via e-mail at ljeditor@sunsite.unc.edu, or as Editor, Linux Jour- nal, P.O. Box 85867, Seattle, WA 98145-1867 Advertising in LJ Linux Journal is supported by a combination of subscription and advertising revenue. Rates are competitive for the number of readers we reach and our specific target audience matches the needs of those who have products targeted to the Linux market. We currently only offer display advertising. Future plans include classified advertising and a card deck. If you are interested, request a media kit and rate card. Our advertising manager is: Joanne Wagner, Linux Journal, P.O. Box 85867, Seattle, WA 98145-1867 FAX: +1 206 526-0803, Phone: +1 206 524-8338 E-mail: joanne@fylz.com Linux-related Product Releases If you have a new product that you feel is of interest to the Linux community, send us a press release. We have a regular new products column and will publish information on the most relevant products. We also have a review team and may be interested in reviewing specific products. If you would be willing to make a review copy of a product available, please let us know. Send new product information to: New Products, Linux Journal, P.O. Box 85867, Seattle, WA 98145-1867 FAX: +1 206 526-0803, Phone: +1 206 524-8338 E-mail: newprod@fylz.com Consultant's Directory We maintain a directory of consultants that work with Linux. The directory is published periodically in Linux Journal. The first listing is currently free, and rates for subsequent listings are reasonable. To be listed, send your name, company, address, phone and e-mail and/or fax contact information along with a brief de- scription of what you work on to: Consultant Directory, Linux Journal, P.O. Box 85867, Seattle, WA 98145-1867 FAX: +1 206 526-0803, Phone: +1 206 524-8338 E-mail: joanne@fylz.com Distributors/Retailers We are in the process of setting up newsstand distribution of LJ. Computer Literacy Bookstores and Barnes & Noble carry the maga- zine and we expect to get distribution to many other stores in the next few months. If you are aware of a store that should carry LJ you can suggest they contact SSC at (206) 527-3385 about reselling or send us e- mail at dist@ssc.com with their contact information. Misc Q: Is LJ available Electronically? A: Not yet. Once we have the paper copy under control we plan to work on this. It requires contract arrangements with both authors and advertisers before we can do it. Q: Can information printed in LJ be reprinted? A: Authors may use the material with the only restriction being that if they use it immediately they include the phrase "reprint- ed with permission of Linux Journal". Other people wishing to use material should contact LJ. Permission is generally granted ex- cept where restricted by author or other prior copyright. If All Else Fails ... If your question isn't answered here, send e-mail to ljedi- tor@sunsite.unc.edu. We will send a e-mail response and, if it is a common question we will add it to this FAQ. If you don't have e-mail, you can fax questions to (206) 526-0803 or call (206) 524-8338. -- Phil Hughes, Publisher, Linux Journal (206) 527-3385 usually phil@ssc.com, sometimes fyl@eskimo.com ------------------------------ From: tim@maths.tcd.ie (Timothy Murphy) Crossposted-To: utah.linux Subject: Re: Has anyone gotten ftape to work? Date: 30 Sep 1994 21:06:49 +0100 dennisf@denix.elk.miles.com (Dennis Flaherty) writes: >> >To get ftape to work, you must upgrade to Linux 1.1.50. >> >You must then get the latest version of ftape, ftape-1.13b, >> >> Hmm. I'm about to purchase a tape drive for use w/ Linux. But I'm >> running version 1.0.9 (and I'm very happy with it). Can someone >> confirm that ftape works with 1.0.9 or thereabouts? >> >It worked for me back then; just *don't* apply the ftape-irq-dma.patch. >It's for the new kernels. If you buy a Conner C250MQ, apply the >ftape-conner.patch if you use Conner's DOS/Windows software to format >your tapes. OK, let's leave it like this. Try the ftape that comes with slackware 2.0.0. If it works, great. You're one of the lucky few. You ought to play the stock exchange. Why not ask Sharron Stone to marry you? But if that ftape doesn't work, upgrade to Linux 1.1.50 -- it may not be necessary to go all the way, but why not? -- and use ftape-1.13b with the ftape-irq-dma.patch. -- Timothy Murphy e-mail: tim@maths.tcd.ie tel: +353-1-2842366 s-mail: School of Mathematics, Trinity College, Dublin 2, Ireland ------------------------------ From: taylor@pollux.cs.uga.edu (john taylor) Subject: Re: ftp freeze problems Date: 29 Sep 1994 19:47:55 GMT Craig Tavener (craig@chem.chem.wits.ac.za) wrote: I've got linux (Slackware2.0) recently installed on a 468-66. It has an ethernet card and is networked to Novell and and UNIX. When ftp/telnetting from linux to elsewhere things generally work well. However, when trying to ftp into the linux machine (most notably from the novell network) the session frequently freezes. Pressing cntl-C returns the ftp prompt, but the last action ends up being truncated. A good example of this is a file transfer. All packet but the last one get through. Then it freezes and the last packet it lost. Does anyone have any idea what is going on here? I have the same problem. When I ftp from my novell server to my linux box. The entire file will transfer except the last 1 or 2K. How can this be fixed? John ------------------------------ From: ulmer@cutter.cis.ufl.edu (Stephen Louis Ulmer) Subject: Re: X-windows Date: 29 Sep 1994 19:49:42 GMT The file you want to have in your homes is .xsession, not .xinitrc. Xdm sources the sytem Xsession, which sources the user's, or uses a failsafe config. man xdm is very helpful. You should be able to just copy your .xinitrc to .xsession (or symlink it...). Nose around with the man pages and look around in your xdm directory. (probably /usr/lin/X11/xdm - for slackware at least) hope this helps, Stephen ------------------------------ From: ulmer@cutter.cis.ufl.edu (Stephen Louis Ulmer) Subject: Re: Matrox MGA Date: 29 Sep 1994 20:02:44 GMT >Hallo All, > >I'am looking for a XConfig-File to get the Matrox Ultima work. >Who can help me ? An Xconfig won't do you much good... there are currently no Xservers that support the Matrox MGA chip. You can run the card in absurly low resolution by picking the VESA defaults/generic options for the vga_16 Xserver. HOWEVER, there is a VERY nice COMMERCIAL Xserver in beta test that works on the MGA. It is made by Metrolink, and is well on it's way to being ready. Stephen ------------------------------ From: ferng@NS.Arizona.EDU(Jimmy M. Ferng) Subject: Information when TELNET Date: 29 Sep 1994 19:54:58 GMT Does anyone know where to modify in the Linux system so that I can display some information telling people what login name and password to use when someone "telnet" to this Linux system? I have some accounts set up for public access and would like to provide an informative pointer. Thanks a lot in advance. -- Jimmy M. Ferng | University of Arizona Internet: ferng@ns.arizona.edu | Computer Center ------------------------------ ** FOR YOUR REFERENCE ** The service address, to which questions about the list itself and requests to be added to or deleted from it should be directed, is: Internet: Linux-Admin-Request@NEWS-DIGESTS.MIT.EDU You can send mail to the entire list (and comp.os.linux.admin) via: Internet: Linux-Admin@NEWS-DIGESTS.MIT.EDU Linux may be obtained via one of these FTP sites: nic.funet.fi pub/OS/Linux tsx-11.mit.edu pub/linux sunsite.unc.edu pub/Linux End of Linux-Admin Digest ******************************