From: Digestifier To: Linux-Admin@senator-bedfellow.mit.edu Reply-To: Linux-Admin@senator-bedfellow.mit.edu Date: Fri, 23 Sep 94 06:13:24 EDT Subject: Linux-Admin Digest #93 Linux-Admin Digest #93, Volume #2 Fri, 23 Sep 94 06:13:24 EDT Contents: Re: lp polling driver = no irq? (olav woelfelschneider) Re: Can't login, no shell... (root) Has anyone gotten ftape to work? (Pete Kruckenberg) driver for NE3200 (EtherExpress 32 EISA)? (Stefan (SAM Muenzel)) LINUX WANTED !!! (Franck) Re: Multiple Novell logins under DOSEMU. How? (Alan Cox) Re: How to print out MAN PAGES ??? (Peter Dalgaard SFE) Re: Linux on CD ok but X is soooo sloooow!!! (david patterson) Dosemu and long file names (Bryan Wright) Re: going back to DOS -- hard disk problems (Jay Ashworth) Re: Intel Saturn chipset for 486 (w linux) ??? (Jay Ashworth) Re: Install without repartitioning?? (Martin Ehring) CLOS for Linux (Iain J. Bryson) Re: Multiple Novell logins under DOSEMU. How? (Mark Evans) Re: Disappearing Keyboard (Bao Chau Ha) Re: Large SCSI Harddisks (Tom Griffing) Re: AutoMount For Linux (Tim W. Janes) Re: Printers on the parallel port (Alex R. Moon) Where is insmod (Robert Broughton) [DOSEMU] dosemu throws my clock off. Why??? (Joel M. Hoffman) Seyon with local echo (Janusz Smolak) ---------------------------------------------------------------------------- From: wosch@rbg.informatik.th-darmstadt.de (olav woelfelschneider) Subject: Re: lp polling driver = no irq? Date: 22 Sep 1994 08:50:46 GMT Uwe Bonnes (bon@lte.e-technik.uni-erlangen.de) wrote: : You could, but I would use "tunelp /dev/lp? -i 7" to use the interrupt for : printing again (performance). Hmmm.... the only performance penalty I got when printing without irq was that it always took about 2 seconds to resume printing when the printer was out of paper or had another error. Printing itself was fast. But anyway, it is surely possible that the cpu may get loaded with the polling driver. That didn't hurt me, personally, even on the slow 386/40 8MB. I would prefer using the interrupt for another serial port, since it is more needed there. You should be fine by leaving the interrupt jumpered on both the serial and the printer port. If Linux uses the lp-polling driver, it should not enable printer interrupts in the hardware (is that true folx?), so there is no interfering with the com port. I got no problems with an interruptless printer on dos, note that the first printerport on monochrome adapters didn't have an interrupt, so dos still does not use it, and windows should still have drivers which don't use it. Just my few ... Olav -- /======================================+======================================\ | Olav "Mac" Woelfelschneider | I refuse to grow up, | | wosch@rbg.informatik.th-darmstadt.de | I don't want to lose my humor... | \======================================+======================================/ ------------------------------ From: root@awc2-03.bham.ac.uk (root) Subject: Re: Can't login, no shell... Date: 22 Sep 1994 08:47:21 GMT Also check the permissions on / haven't got screwed somehow... It happens, trust me (yes I am referring to YOU Mark *8-P) -Neil ------------------------------ From: kruckenb@cadesm43.eng.utah.edu (Pete Kruckenberg) Crossposted-To: utah.linux Subject: Has anyone gotten ftape to work? Date: 21 Sep 1994 22:26:53 GMT I'm going to be setting up some kind of backup system on my Linux box, and I'm wondering if anyone has gotten ftape to work. I haven't really tried, but I heard some comments that it didn't work or was difficult to set up. Are they true? Also, any recommendations on what to get to back-up a 1GB drive (all Linux ext2)? I was thinking about using a Colorado Jumbo 250, but that'll take several tapes to backup. Are there any Linux-compatible tape drives (SCSI or proprietary bus, since I don't have IDE in this machine) that are pretty affordable (under $500) that are close to 1GB? Thanks. Pete. ------------------------------------------------------------------------ Pete Kruckenberg School: kruckenb@sal.cs.utah.edu University of Utah Work: pete@dswi.com Computer Engineering For even more addresses, "finger pete@dswi.com" ------------------------------ From: muenzel@ceres.tat.physik.uni-tuebingen.de (Stefan (SAM) Muenzel) Crossposted-To: comp.os.linux.development,comp.os.linux.help,comp.os.linux.misc,de.comp.os.linux Subject: driver for NE3200 (EtherExpress 32 EISA)? Date: 22 Sep 94 15:49:22 GMT Hi folks, I have the following problem: my current employer has an EISA-machine with an (for me) unknown ethernet-card. It's a Intel EtherExpress 32Bit ( NE3200 ) / EISA I'm not sure this is the correct name, but i hope some guru on the net will recognize it. I looked through the kernel-sources (1.1.50), but couldn't find a driver for this card (or is it the ac3200 in drivers/net?). Does anybody know of this card, or is there already someone writing the driver? It's fairly important for us to get them working (the destination-machine will have 3 of them). Any information would be of great value ;-) ciao SAM -- ============================================================================= Stefan "SAM" Muenzel . o c , Fencing Theoretical Astrophysics / "#v-- --v#" is Computational Physics /'> <`\ fun ! University of Tuebingen Auf der Morgenstelle 10 --- D-72076 Tuebingen --- Germany Email: muenzel@tat.physik.uni-tuebingen.de ============================================================================= ------------------------------ From: franck@davina.inria.fr (Franck ) Subject: LINUX WANTED !!! Date: 22 Sep 1994 09:27:21 GMT Hello, everybody ! I want to install Linux on my PC. I have some very simple questions : - What's the last version of Linux ? - Where can I find it ? (ftp site...) Is documentation about installation, administration be complete and clear ? Thanks a lot for any contribution. _____/ _____/ / / /_ / Franck Charlemagne. __/ / Projet Rodin. / / e-mail : franck@inria.fr _/ _/ ______/ "Whatever you can do, or dream you can, begin it. Boldness has genius, power and magic in it." Goethe. ------------------------------ From: iialan@iifeak.swan.ac.uk (Alan Cox) Subject: Re: Multiple Novell logins under DOSEMU. How? Date: Thu, 22 Sep 1994 09:14:14 GMT In theory using the kernel IPX support instead of the DOSemu packet driver should have the desired effect too as each client will allocate a different IPX socket number. Alan -- ..-----------,,----------------------------,,----------------------------,, // Alan Cox // iialan@www.linux.org.uk // GW4PTS@GB7SWN.#45.GBR.EU // ``----------'`----------------------------'`----------------------------'' ------------------------------ From: pd@kubism.ku.dk (Peter Dalgaard SFE) Subject: Re: How to print out MAN PAGES ??? Date: 22 Sep 1994 18:58:20 GMT In <1994Sep20.210047.595@habbib.mayn.sub.de> jachmann@habbib.mayn.sub.de (Christian Jachmann) writes: >NISCHELWITZER Alexander Kurt (nischi@tu-graz.ac.at) wrote: >: Hello, >: I want to print out online manpages >: (e.g. man cd | lpr -Pxxx ) but I have >: problems because I get always ugly >: control characters (, , etc.). >: How can I use nroff (groff, troff, etc.) >: and the man-macros to avoid these control >: characters and my >: GREATEST PROBLEM: how can I print >: out preformated man pages without >: these ugly control characters on my printer? >If u've got a Postscript-Printer, try to get a2ps. It converts ASCII to >PostScript, prints 2 or more pages on one converts all control characters. Actually, it is a bit of a "verschlimmbesserung" that the distribution tend to carry the formatted man pages only. Granted, you get faster lookup times, but you lose the ability to pretty-print them with 'man -t'. For some of the larger "pages", this can actually be the difference between readable and not. The slackware contrib directory has a rather extensive set of manual sources. BTW: Can you have the *sources* in compressed form and still have 'man' working? -- O_ ---- Peter Dalgaard c/ /' --- Dept. of Biostatistics ( ) \( ) -- University of Copenhagen ~~~~~~~~~~ - (pd@kubism.ku.dk) ------------------------------ From: pattersd@cs.colostate.edu (david patterson) Subject: Re: Linux on CD ok but X is soooo sloooow!!! Date: 22 Sep 1994 20:35:09 GMT Reply-To: pattersd@cs.colostate.edu In article lfi@tpd.dsccc.com, lslane@tpd.dsccc.com (Larry Slane) writes: >I recently installed Linux from CD on to a 300MB drive. >Running a 50Mhz 486slc with 8Meg RAM, but Xwindows is >too slow to use, moving from one window to another it >takes the system up to 30 seconds to catch up. >The hard drive seems to thrash a bit and the CD is >accessed at least once during this process. >Would like to hear any ideas on this topic. Hrm, sounds like you don't have enough swap space set up. I have 8 megs of ram and 20 megs of swap set up which seems to do okay. You can see if this is a problem by typing "free" and seeing if all your memory and swap is consumed. --- Dave Patterson pattersd@cs.colostate.edu -------,--'--,-<@ ------------------------------ From: bryan@elvis.phys.virginia.edu (Bryan Wright) Subject: Dosemu and long file names Date: Tue, 20 Sep 1994 17:31:51 GMT Hi Folks, Is there a way to get Dosemu to see linux files whose names don't fit the DOS limitations? In many cases, long names could be truncated unambiguously. Where truncation would result in ambiguity, the file name could be encoded in some way which would create a unique name fitting the DOS limitations. Is this already implemented in Dosemu and, if so, how do I turn it on? Thanks in advance, Bryan -- =============================================================================== Bryan Wright |"If you take cranberries and stew them like Physics Department | applesauce, they taste much more like prunes University of Virginia | than rhubarb does." -- Groucho Charlottesville, VA 22901 | (804) 924-6814 | bryan@sphinx.phys.virginia.edu =============================================================================== ------------------------------ From: jra@zeus.IntNet.net (Jay Ashworth) Crossposted-To: comp.os.linux.help,comp.os.linux.misc Subject: Re: going back to DOS -- hard disk problems Date: 20 Sep 1994 01:25:42 -0400 BOBSNYDER421@delphi.com writes: >Well, I'm not sure if you mentioned the type of 270M disk, but- >you cannot format an IDE drive. Low level, that is. Forget the >DEBUG format, that is low level format. Well... You can low level format an IDE drive, but you have to have the right software. It's no longer the $3500 it was when IDE first happened; I gather Disk Manager either 5.x or 6.x can do it for a lot of drives. But I do _hate_ drives that lie to the operating system about their geometry. Blows my elevator seek algorithms all to hell... Cheers, -- jr 'avg. seek time: 20 minutes. The kids are too smart for me...' a -- Jay R. Ashworth Ashworth Designer & Associates ka1fjx/4 High Technology Systems Consulting jra@baylink.com +1 813 790 7592 ------------------------------ From: jra@zeus.IntNet.net (Jay Ashworth) Crossposted-To: comp.sys.ibm.pc.hardware.chips,comp.os.linux.help Subject: Re: Intel Saturn chipset for 486 (w linux) ??? Date: 20 Sep 1994 01:28:49 -0400 dplatt@3do.com (Dave Platt) writes: [ glad to see you got a new gig, Dave... ] >problems, no unexplainable hangs or crashes or data corruption. Runs >like a bat out of hell, too - FTP'ing a big file from a SparcStation-10 >yielded between 820 and 870 kbytes/second, sustained throughput all the >way up through the Linux filesystem and SCSI driver. Good ghod... that's better than half the channel capacity, isn't it? I don't suppose you can bench a _pair_ of identical machines, can you? I'd purely _love_ to know how much of a hit your taking running Polaris instead of Linux at the other end... Cheers, -- jra -- Jay R. Ashworth Ashworth Designer & Associates ka1fjx/4 High Technology Systems Consulting jra@baylink.com +1 813 790 7592 ------------------------------ From: ehring@cony.gsf.de (Martin Ehring) Subject: Re: Install without repartitioning?? Date: 22 Sep 1994 10:02:55 GMT Reply-To: ehring@gsf.de In article <35pmhj$ppg@nic.umass.edu>, durzya@titan.ucs.umass.edu (Alexander A Durzy) writes: | Does anyone know if there is a way to install linux | without repartitioning a DOS formatted drive? | you may try fips.exe. It is an interactive partition splitter. I used it without problems and _really_ recommend it. fips .exe can be found e.g. on sunsite. Martin ------------------------------ From: iain@ece.concordia.ca (Iain J. Bryson) Subject: CLOS for Linux Date: 23 Sep 1994 00:16:51 GMT Is there an implementation of CLOS for Linux? the clisp included with slackware 2.0 doesn't seem to have the extensions. Thanks. -- iain@ece.concordia.ca (Iain Bryson) "I have detailed files." Concordia University, Montreal, Canada - Computer Engr. "Now we're cooking with evil gas!" - Kids in the Hall. ------------------------------ From: evansmp@mb4714.aston.ac.uk (Mark Evans) Subject: Re: Multiple Novell logins under DOSEMU. How? Date: Thu, 22 Sep 1994 15:29:39 GMT Alan Cox (iialan@iifeak.swan.ac.uk) wrote: : In theory using the kernel IPX support instead of the DOSemu packet driver : should have the desired effect too as each client will allocate a different : IPX socket number. There is still the problem with the workstation shell holding onto the RIP socket, unless a workarround has been applied in the latest version of the dosemu code. ------------------------------ From: habaoch@eng.auburn.edu (Bao Chau Ha) Subject: Re: Disappearing Keyboard Date: Tue, 20 Sep 1994 15:30:30 GMT In article wpp@marie.physik.tu-berlin.de (Kai Petzke) writes: > >>Does anyone have an idea why after boot up my keyboard would suddenly act >>as if it's not getting any power? Everything worked fine as I set things >>up using the root and boot disks. > >Did you accidently press Ctrl-Q? That stops any further screen output, >including, what you type. > >Press Ctrl-S for remedy. Shouldn't it be the other way around? I always thought Ctrl-S locks the screen scrolling and Ctrl-Q releases the scroll lock. Bao ------------------------------ From: tom@metronet.com (Tom Griffing) Subject: Re: Large SCSI Harddisks Date: Wed, 21 Sep 1994 03:33:48 GMT In article <1994Sep15.221457.15761@powertech.no>, Oystein Homelien wrote: >I'm just about to install a 2.1GB SCSI disk. But I've had problems with >disks larger than 1023 sectors (?) earlier. I'm going to use Slackware 2, >but I fear it is not going to install smoothly. What can I do to make it >work? Please answer by email (oystein@powertech.no), I'll repost a summary >of the information I get. I've got two machines with disks greater than 1023 Cylinders ... and ESDI and a SCSI. The problem is not with Linux recognizing the higher cylinders, but in booting. LILO won't install properly for me on my ESDI machine with 1630 cylinders, since the Linux primary partition has some cylinders > 1023. But, I routinely that machine from a floppy and it runs fine. When I installed my SCSI machine, I created the primary Linux partition with all cylinders below 1024 cylinders. I have created a secondary partition for the rest of the disk and mounted it separately. My SCSI controller (Ultrastor 34F) has a jumper that can be set to re-map the disk geometry and make it appear to have half the cylinders. I haven't tried this feature, but a friend has, and said that it didn't work with Linux. I suspect that it is something specific to Ultrastor/Linux. Your mileage may vary. Hope this helps, -- _____________________________________________________ | Thomas L. Griffing | | | tom@metronet.com | (214) 352-3441 | |__________________________|__________________________| ------------------------------ From: janes@signal.dra.hmg.gb (Tim W. Janes) Subject: Re: AutoMount For Linux Date: 22 Sep 1994 16:49:15 +0100 In article , Jake Colman wrote: >SethMeister G. (consp05@bingsuns.cc.binghamton.edu) wrote: > >There is a version of amd (AutoMounter) for Linus that works like a charm >for autmounting remote directories. It does not automatically mount >diskettes. I would be interested in such a beastie as well. > We run amd on DEC OSF/1 to automount CD-ROM's very happily - I would think it should work for floppies on Linux. If I get a chance I will try on our linux amd setup. here is the entry in the auto.mnt for a machine with a cdrom sappho/iso_cdrom host==sappho;type:=cdfs;dev:=/dev/rz4c;opts:=noversion \ host!=sappho;type:=nfs;rhost:=sappho Unless you wait for the timeout period you have to do a amq -u before removing the cd-rom. Tim. -- Tim Janes | e-mail : janes@signal.dra.hmg.gb Defence Research Agency | tel : +44 684 894100 Malvern Worcs | fax : +44 684 894384 Gt Britain | #include ------------------------------ From: moon@symphony.cc.purdue.edu (Alex R. Moon) Crossposted-To: comp.os.linux.help Subject: Re: Printers on the parallel port Date: 21 Sep 1994 22:21:10 GMT In article <1994Sep21.193000.2977@reto.stgt.sub.org: , Heike C. Zimmerer In article <35mg9d$ob3@crl4.crl.com> sefarlow@crl.com (Stephen E. Farlow) : >writes: : : >>George Photakis (georgep@sabre.com) wrote: : >>: LPT1 in DOS is /dev/lp0 under Linux.... : >>***************************************************************** : >>WRONG!!! A laser printer in Linux is /dev/lp1 !!! Becareful here! : >>***************************************************************** : : Linux can't detect what kind of printer you are running, be : it laser or not (how should it - parallel printer interfaces are : unidirectional?). Well, not always, but most of the time. At any rate, as I recall, if you have an old bus, lpt1 == /dev/lp0 if you have a newer bus lpt1 == /dev/lp1 : : There is a Linux Printing-HOWTO. Look for Chapter 2.13 (Printer device : names). : : -- : Heike C. Zimmerer hcz@tazlwurm.bb.bawue.de --Alex moon@symphony.cc.purdue.edu ------------------------------ From: Robert_Broughton@mindlink.bc.ca (Robert Broughton) Subject: Where is insmod Date: Wed, 21 Sep 94 22:07:27 -0800 I'm trying to get ftape working, and it says that you need something called /sbin/insmod to install it. Does anyone know where I can find this program? -- *-*-*-*-*-*-*-*-*-*-* Robert Broughton Robert_Broughton@mindlink.bc.ca "We calm and reassure. We embrace people with the message that we're all in it together. That our leaders are infallible and that there is nothing, absolutely nothing wrong." - Miles Drentell, _thirtysomething_ ------------------------------ From: joel@wam.umd.edu (Joel M. Hoffman) Subject: [DOSEMU] dosemu throws my clock off. Why??? Date: Tue, 20 Sep 1994 01:08:44 GMT I just upgraded to a recent version of dosemu (0.52) and now I find that my system clock is running VERY VERY VERY fast (when dosemu is running). For example, after using dosemu for a while today, I find that the clock is 11 hours fast!! What's going on? Is this a known bug? Is there a fix? -Joel (joel@wam.umd.edu) -- ============================================================================= |_|~~ Germany, Europe. 1943. "The diameter of the bomb was 30 centimeters, __|~| 16 Million DEAD. and the diameter of its destruction, about 7 meters, and in it four killed and 11 wounded. cnc Bosnia, Europe. 1993. And around these, in a larger circle of pain cnc HOW MANY MORE? and time, are scattered two hospitals and one cemetery. But the young woman who was buried in the place from where she came, at a distance of more than than 100 kilometers, enlarges the circle considerably. And the lonely man who is mourning her death in a distant country incorporates into the circle the whole world. And I won't speak of the cry of the orphans that reaches God's chair and from there makes the circle endless and godless." ============================================================================= Tell Clinton to stop the genocide: president@whitehouse.gov ------------------------------ From: jsmolak@extro.ucc.su.OZ.AU (Janusz Smolak) Subject: Seyon with local echo Date: Thu, 22 Sep 1994 23:56:49 GMT Does anyone have an idea how to enable local echo in Seyon. I'd really appreciate any help on that. regards. ------------------------------ ** FOR YOUR REFERENCE ** The service address, to which questions about the list itself and requests to be added to or deleted from it should be directed, is: Internet: Linux-Admin-Request@NEWS-DIGESTS.MIT.EDU You can send mail to the entire list (and comp.os.linux.admin) via: Internet: Linux-Admin@NEWS-DIGESTS.MIT.EDU Linux may be obtained via one of these FTP sites: nic.funet.fi pub/OS/Linux tsx-11.mit.edu pub/linux sunsite.unc.edu pub/Linux End of Linux-Admin Digest ******************************